How to Update Galaxy Tab 2 10.1 (Wi-Fi) P5110 with Android 4.2.2 XXDML1 Jelly Bean Official Firmware

The Wi-Fi version of the Samsung Galaxy Tab 2 10.1 with model number GT-P5110 has received the latest Android 4.2.2 Jelly Bean update with firmware build number P5110XXDML1. The new official update is currently available as an Over-The-Air (OTA) update as well as through Samsung KIES.

Firmware details
PDA: P5110XXDML1
CSC: P5110PHNDMJ1
MODEM: P5110XXDML1
Version: Android 4.2.2
Build date: Dec 16, 2013
Regions: Netherlands

Samsung Galaxy Tab 2 10.1 (Wi-Fi) P5110 users who missed the OTA update notification or unable to access the update over Samsung KIES, and those who are residing outside Netherlands can now download and install the same manually, using our step-by-step guide.

Pre-requisites
1. Install USB Drivers for Samsung Galaxy Tab 2 10.1 on the computer.
2. Enable USB Debugging Mode on the device by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. The Galaxy Tab 2 10.1 should be factory unlocked.
5. Ensure the battery of the device is charged more than 80 percent.
6. The Android 4.2.2 XXDML1 Jelly Bean firmware is compatible only with the Wi-Fi version of Samsung Galaxy Tab 2 10.1 with model number P5110. Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy Tab 2 10.1 by navigating to Settings >> About Phone.

Files Required
1. Android 4.2.2 XXDML1 Jelly Bean Firmware (Mirror Link) for Galaxy Tab 2 10.1 (Wi-Fi) P5110
2. Odin 3.07

Steps to Update Galaxy Tab 2 10.1 (Wi-Fi) P5110 with Android 4.2.2 XXDML1 Jelly Bean Firmware
Step 1: Extract Firmware zip file using winrar/7zip/winzip or any other extracting tool, you will get a .tar.md5 file and some other files (optional).
Step 2: Extract Odin zip file and you will get Odin3 v3.07.exe along with few other files.
Step 3: Switch off Galaxy Tab 2 10.1.
Step 4: Boot the device into Download Mode by pressing and holding Volume Down and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 5: Run Odin on the computer as an Administrator.
Step 6: Connect the Galaxy Tab 2 10.1 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.

Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.

Step 7: Select the following files in Odin from extracted P5110XXDML1 firmware folder:

• Click the PDA button and select the .tar.md5 file.
• Click the Phone button and select file with MODEM in its name. Ignore if there is no such file.
• Click the CSC button and select file with CSC in its name. Ignore if there is no such file.
• Click the PIT button and select the .pit file. Ignore if there is no such file.

Step 8: In Odin, enable Auto Reboot and F. Reset Time checkboxes. Also, ensure the Re-Partition checkbox is chosen only if a .pit file was chosen in the previous step.
Step 9: Verify everything suggested in Step 7 and Step 8 is done correctly. Then hit the Start button to begin the installation process.
Step 10: Once the installation process is completed, your device will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from the computer.

Samsung Galaxy Tab 2 10.1 (Wi-Fi) P5110 should be now updated with official Android 4.2.2 XXDML1 Jelly Bean. Head over to Settings >> About Phone to verify the software version running on the device.

Note: If Galaxy Tab 2 10.1 (Wi-Fi) P5110 stuck at booting animation after Step 10 then go to recovery mode (press and hold the Volume Up and Power buttons together) and perform Wipe data/Factory Reset and Wipe Cache Partition task before selecting reboot system now function. In recovery mode use Volume keys to navigate between options and Power key to select the option. Please note, performing wiping task will erase your device internal memory data and not external SD card data.

Click here to know How to Root Galaxy Tab 2 10.1 (Wi-Fi) P5110 running on Android 4.2.2 Jelly Bean firmware.

Read More

How to Update Galaxy Note 8.0 (Wi-Fi) N5110 with Android 4.2.2 XXCMK1 Jelly Bean Official Firmware

Samsung has recently released another Android 4.2.2 Jelly Bean update with firmware build number N5110XXCMK1 for the Wi-Fi variant of the Galaxy Note 8.0 (GT-N5110). The new official firmware is now available as an Over-The-Air (OTA) update as well as through Samsung KIES.

Firmware details
PDA: N5110XXCMK1
CSC: N5110OXACMJ2
MODEM: N5110XXCMK1
Version: Android 4.2.2
Build date: Nov 01, 2013
Regions: United Kingdom

Samsung Galaxy Note 8.0 (Wi-Fi) N5110 users who missed the OTA update notification or unable to access the update over Samsung KIES, and those who are residing outside UK can now download and install the same manually, using our step-by-step guide.

Pre-requisites
1. Install USB Drivers for Samsung Galaxy Note 8.0 on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. The Galaxy Note 8.0 should be factory unlocked.
5. Ensure the battery of the phone is charged more than 80 percent.
6. The Android 4.2.2 XXCMK1 Jelly Bean firmware is compatible only with the Wi-Fi version of the Galaxy Note 8.0 (GT-N5110). Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy Note 8.0 by navigating to Settings >> About Phone.

Files Required
1. Android 4.2.2 XXCMK1 Jelly Bean Firmware (Mirror Link) for Galaxy Note 8.0 (Wi-Fi) N5110
2. Odin 3.07

Steps to Update Galaxy Note 8.0 (Wi-Fi) N5110 with Android 4.2.2 XXCMK1 Jelly Bean Firmware
Step 1: Extract Firmware zip file using winrar/7zip/winzip or any other extracting tool, you will get a .tar.md5 file and some other files (optional).
Step 2: Extract Odin zip file and you will get Odin3 v3.07.exe along with few other files.
Step 3: Switch off the Galaxy Note 8.0.
Step 4: Boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 5: Run Odin on the computer as an Administrator.
Step 6: Connect the Galaxy Note 8.0 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.

Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.

Step 7: Select the following files in Odin from extracted N5110XXCMK1 firmware folder:

• Click the PDA button and select the .tar.md5 file.
• Click the Phone button and select file with MODEM in its name. Ignore if there is no such file.
• Click the CSC button and select file with CSC in its name. Ignore if there is no such file.
• Click the PIT button and select the .pit file. Ignore if there is no such file.

Step 8: In Odin, enable Auto Reboot and F. Reset Time checkboxes. Also, ensure the Re-Partition checkbox is chosen only if a .pit file was chosen in the previous step.
Step 9: Verify everything suggested in Step 7 and Step 8 is done correctly. Then hit the Start button to begin the installation process.
Step 10: Once the installation process is completed, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from the computer.

Samsung Galaxy Note 8.0 (Wi-Fi) N5110 should be now updated with official Android 4.2.2 XXCMK1 Jelly Bean. Head over to Settings >> About Phone to verify the software version running on the device.

Note: If Galaxy Note 8.0 (Wi-Fi) N5110 stuck at booting animation after Step 10 then go to recovery mode (press and hold the Volume Up, Home and Power buttons together) and perform Wipe data/Factory Reset and Wipe Cache Partition task before selecting reboot system now function. In recovery mode use Volume keys to navigate between options and Power key to select the option. Please note, performing wiping task will erase your device internal memory data and not external SD card data.

Click here to know How to Root Galaxy Note 8.0 (Wi-Fi) N5110 running on Android 4.2.2 Jelly Bean firmware.

Read More

How to Root Nexus 7 (2013) Wi-Fi on Android 4.4.1 KOT49E KitKat and Install CWM/TWRP Recovery

Google has just released Android 4.4.1 Kitkat OTA update with build version KOT49E for the Wi-Fi version of the Nexus 7 (2013).

Note: You can manually download the OTA for the Nexus 7 (2013) Wi-Fi directly from Google's Update Servers and follow our step-by-step guide to install the update manually.

Nexus 7 (2013) Wi-Fi users who have already updated their devices with Android 4.4.1 KOT49E KitKat, may root their devices using the tutorial below.

Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!

Pre-requisites
1. Make a backup of all your important data before following the guide.
2. Enable USB Debugging Mode on the tablet. Go to Settings >> About Phone. Tap on Build Number several times till the message shows "You are now a Developer". Exit from "About Phone" and find the "Developer Options" settings. Enable USB debugging.
3. The Nexus 7 bootloader should be unlocked.
4. Ensure the battery of the tablet is charged more than 80 percent.
5. The CWM/TWRP Recovery and SuperSU files compatible only with the Wi-Fi version of Nexus 7 (2013). Applying these on any incorrect variant will brick the device. Verify the model number of the Nexus 7 by navigating to Settings >> About Phone.

File Required
1. Android SDK
2. Fastboot
3. CWM or TWRP Recovery
4. SuperSU (UPDATE-SuperSU-v1.75.zip) or the latest version

Steps to Root Nexus 7 (2013) Wi-Fi Running on Android 4.4.1 KOT49E KitKat and Install CWM/TWRP Recovery
Step 1: Install the Android SDK. The package includes the necessary drivers for connecting your tablet to the computer, which is mandatory for the rooting process.
Step 2: Extract the Fastboot .zip file using winrar/7zip/winzip or any other extracting tool and copy it to the android-sdk-windowsplatform-tools directory on the computer.
Step 4: Copy the CWM or TWRP .img file to the android-sdk-windowsplatform-tools directory on the computer.
Step 5: Connect the Nexus 7 to the computer using USB cable. Then copy the SuperSU .zip file to the SD card of your tablet.
Step 6: Switch off the Nexus 7. Then boot the device into fastboot mode by pressing and holding Volume Up, Volume Down, and Power buttons together.
Step 7: Navigate to android-sdk-windowsplatform-tools directory and open Command Prompt (Shift + Right-click >> Open Command Prompt). Then run the following command:

fastboot flash recovery recovery-clockwork-touch-6.0.4.3-grouper.img

Step 8: Once completed, choose RECOVERY from the Fastboot menu and enter Recovery Mode.
Step 9: In CWM Recovery, select "install zip from sdcard" and then select "choose zip from sdcard". Now, navigate to the SuperSU .zip file that you copied earlier and confirm the installation by selecting Yes.
Step 10: Once the installation process completes, return to main recovery menu and select "reboot system now".

Nexus 7 (2013) Wi-Fi running on Android 4.4.1 KOT49E KitKat is now rooted successfully. Open the app drawer of the Nexus 7 and look for an app called SuperSU. Verify the root status of the device by downloading Root Checker app from Google Play Store.

Click here to know How to Update Nexus 7 (2013) Wi-Fi with Android 4.4.1 KOT49E KitKat.

Read More

How to Update Nexus 7 (2013) Wi-Fi with Android 4.4.1 KOT49E KitKat

The Wi-Fi version of the Google Nexus 7 (2013) has already received Android 4.4.1 Kitkat OTA update with build version KOT49E.

Nexus 7 (2013) Wi-Fi users who missed the OTA update notification or cannot wait for its official release, may follow our step-by-step guide to install the update manually.

Pre-requisites
1. Install the Android SDK. The package includes the necessary drivers for connecting Nexus 7 to the computer.
2. Make a backup of all your important data before following the guide.
3. Enable USB Debugging Mode on the tablet. Go to Settings >> About Phone. Tap on Build Number several times till the message shows "You are now a Developer". Exit from "About Phone" and find the "Developer Options" settings. Enable USB debugging.
4. Ensure the battery of the tablet is charged more than 80 percent.
5. The Android 4.4.1 KOT49E KitKat file is compatible only with the Wi-Fi version of the Nexus 7 (2013) running on Android 4.4 KRT16S KitKat. Applying this to any incorrect variant might brick the device. Verify the device model number by navigating to Settings >> About Phone.

File Required
1. Android 4.4.1 KOT49E KitKat for Nexus 7 (2013) Wi-Fi

File name: 90745e15d8902605382c39b6a39a51b5dd8ff170.signed-razor-KOT49E-from-KRT16S.90745e15.zip
MD5 sum: ce344ae6d5d2f74f80c9009947c9cbe9
Size: 52 MB

Steps to Update Nexus 7 (2013) Wi-Fi (Non-Rooted) with Android 4.4.1 KOT49E KitKat
Note: Make sure your Nexus 7 is NOT rooted and has stock recovery.

Step 1: Rename the Android 4.4.1 KOT49E KitKat .zip file to update.zip.
Step 2: Connect the Nexus 7 to the computer using USB cable. Then copy the update.zip file to the SD card of your tablet. Make sure the file is in the root folder.
Step 3: Switch off the Nexus 7. Then boot the device into Fastboot mode by pressing and holding Volume Up and Power buttons together.
Step 4: Follow the on-screen navigation instructions. Then press Volume Up button several times to enter Recovery Mode. An exclamation mark should now appear on the screen. Press and hold the Volume Up and Power buttons together to enter Recovery Mode.
Step 5: Select "update from SD card" option and then navigate to the update.zip file that you copied earlier and confirm the installation by pressing the Power button. The installation should now begin.
Step 6: Once the installation process completes, your tablet will boot automatically. It may take about 5 minutes to complete.

Nexus 7 (2013) Wi-Fi should be now updated with the Android 4.4.1 KOT49E KitKat. Head over to Settings >> About Phone to verify the software version running on the device.

Steps to Update Nexus 7 (2013) Wi-Fi (Rooted) with Android 4.4.1 KOT49E KitKat
Note: Make sure you have ClockworkMod recovery installed on the Nexus 7.

Step 1: Connect the Nexus 7 to the computer using USB cable. Then copy the Android 4.4.1 KOT49E KitKat .zip file to the SD card of your tablet. Make sure the file is in the root folder.
Step 2: Switch off the Nexus 7. Then boot the device into Fastboot mode by pressing and holding Volume Up and Power buttons together.
Step 3: Follow the on-screen navigation instructions. Then press Volume Up button several times to enter Recovery Mode.
Step 4: In CWM Recovery, select "flash zip from SD card" and then select "choose zip from sdcard". Then navigate to the Android 4.4.1 KOT49E KitKat .zip file that you copied earlier and confirm the installation by pressing the Power button. The installation should now begin.
Step 5: Once the installation process completes, return to main Recovery Menu and select "reboot system now". Your tablet will boot now and it may take about 5 minutes to complete.

Nexus 7 (2013) Wi-Fi should be now updated with the Android 4.4.1 KOT49E KitKat. Head over to Settings >> About Phone to verify the software version running on the device.

Click here to know How to Root Nexus 7 (2013) Wi-Fi running on Android 4.4 KOT49E KitKat and Install CWM/TWRP Recovery.

Read More

How to Update Galaxy Tab 3 7.0 (Wi-Fi) SM-T210 with Android 4.1.2 XXAMKH Jelly Bean Official Firmware

Samsung has just rolled out another Android 4.1.2 Jelly Bean update with firmware build number T210XXAMKH for the Wi-Fi version of the Galaxy Tab 3 7.0 bearing model number SM-T210. The new official firmware is now available as an Over-The-Air (OTA) update as well as through Samsung KIES.

Firmware details
PDA: T210XXAMKH
CSC: T210ODDAMK1
MODEM: T210XXAMKH
Version: Android 4.1.2
Build date: Nov 25, 2013
Regions: India, Nepal, Sri Lanka, Bangladesh

Samsung Galaxy Tab 3 7.0 (Wi-Fi) SM-T210 users who missed the OTA update notification or unable to access the update over Samsung KIES, may follow our step-by-step guide to install the update manually.

Pre-requisites
1. Install USB Drivers for Samsung Galaxy Tab 3 7.0 on the computer.
2. Enable USB Debugging Mode on the device by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. The Galaxy Tab 3 7.0 should be factory unlocked.
5. Ensure the battery of the device is charged more than 80 percent.
6. The Android 4.1.2 XXAMKH Jelly Bean firmware is compatible only with the Wi-Fi version of the Samsung Galaxy Tab 3 7.0 (SM-T210). Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy Tab 3 7.0 by navigating to Settings >> About Phone.

File Required
1. Android 4.1.2 XXAMKH Jelly Bean Firmware (Mirror Link 1, Link 2) for Galaxy Tab 3 7.0 (Wi-Fi) SM-T210
2. Odin 3.07

Steps to Update Galaxy Tab 3 7.0 (Wi-Fi) SM-T210 with Android 4.1.2 XXAMKH Jelly Bean Firmware
Step 1: Extract Firmware zip file using winrar/7zip/winzip or any other extracting tool, you will get a .tar.md5 file and some other files.
Step 2: Extract Odin zip file and you will get Odin3 v3.07.exe along with few other files.
Step 3: Switch off Galaxy Tab 3 7.0.
Step 4: Boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 5: Run Odin on the computer as an Administrator.
Step 6: Connect the Galaxy Tab 3 7.0 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.

Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.

Step 7: Select the following files in Odin from extracted T210XXAMKH firmware folder:

• Click the PDA button and select the .tar.md5 file.
• Click the Phone button and select file with MODEM in its name. Ignore if there is no such file.
• Click the CSC button and select file with CSC in its name. Ignore if there is no such file.
• Click the PIT button and select the .pit file. Ignore if there is no such file.

Step 8: In Odin, enable Auto Reboot and F. Reset Time checkboxes. Also, ensure the Re-Partition checkbox is chosen only if a .pit file was chosen in the previous step.
Step 9: Verify everything suggested in Step 7 and Step 8 is done correctly. Then hit the Start button to begin the installation process.
Step 10: Once the installation process is completed, your device will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from the computer.

Samsung Galaxy Tab 3 7.0 (Wi-Fi) SM-T210 should be now updated with the Android 4.1.2 XXAMKH Jelly Bean official firmware. Head over to Settings >> About Phone to verify the software version running on the device.

Note: If Galaxy Tab 3 7.0 (Wi-Fi) SM-T210 stuck at booting animation after Step 10 then go to recovery mode (press and hold the Volume Up, Home and Power buttons together) and perform Wipe data/Factory Reset and Wipe Cache Partition task before selecting reboot system now function. In recovery mode use Volume keys to navigate between options and Power key to select the option. Please note, performing wiping task will erase your device internal memory data and not external SD card data.

Click here to know How to Root Galaxy Tab 3 7.0 (Wi-Fi) SM-T210/T210R running on Android 4.1.2 Jelly Bean firmware.

Read More

How to Update Galaxy Tab 3 7.0 (Wi-Fi) SM-T210 with Android 4.1.2 XXAMKF Jelly Bean Official Firmware

Samsung has just released Android 4.1.2 Jelly Bean Over-The-Air (OTA) update with firmware build number T210XXAMKF for the Wi-Fi version of the Galaxy Tab 3 7.0 (SM-T210).

Firmware details
PDA: T210XXAMKF
CSC: T210DBTAMK2
MODEM: T210XXAMKF
Version: Android 4.1.2
Build date: Nov 19, 2013
Regions: Germany

Samsung Galaxy Tab 3 7.0 (Wi-Fi) SM-T210 users who missed the OTA update notification or unable to access the update over Samsung KIES, and those who are residing outside Germany can now download and install the same manually, using our step-by-step guide.

Pre-requisites
1. Install USB Drivers for Samsung Galaxy Tab 3 7.0 on the computer.
2. Enable USB Debugging Mode on the device by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. The Galaxy Tab 3 7.0 should be factory unlocked.
5. Ensure the battery of the device is charged more than 80 percent.
6. The Android 4.1.2 XXAMKF Jelly Bean firmware is compatible only with the Wi-Fi version of the Samsung Galaxy Tab 3 7.0 (SM-T210). Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy Tab 3 7.0 by navigating to Settings >> About Phone.

File Required
1. Android 4.1.2 XXAMKF Jelly Bean Firmware (Mirror Link) for Galaxy Tab 3 7.0 (Wi-Fi) SM-T210
2. Odin 3.07

Steps to Update Galaxy Tab 3 7.0 (Wi-Fi) SM-T210 with Android 4.1.2 XXAMKF Jelly Bean Firmware
Step 1: Extract Firmware zip file using winrar/7zip/winzip or any other extracting tool, you will get a .tar.md5 file and some other files.
Step 2: Extract Odin zip file and you will get Odin3 v3.07.exe along with few other files.
Step 3: Switch off Galaxy Tab 3 7.0.
Step 4: Boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 5: Run Odin on the computer as an Administrator.
Step 6: Connect the Galaxy Tab 3 7.0 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.

Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.

Step 7: Select the following files in Odin from extracted T210XXAMKF firmware folder:

• Click the PDA button and select the .tar.md5 file.
• Click the Phone button and select file with MODEM in its name. Ignore if there is no such file.
• Click the CSC button and select file with CSC in its name. Ignore if there is no such file.
• Click the PIT button and select the .pit file. Ignore if there is no such file.

Step 8: In Odin, enable Auto Reboot and F. Reset Time checkboxes. Also, ensure the Re-Partition checkbox is chosen only if a .pit file was chosen in the previous step.
Step 9: Verify everything suggested in Step 7 and Step 8 is done correctly. Then hit the Start button to begin the installation process.
Step 10: Once the installation process is completed, your device will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from the computer.

Samsung Galaxy Tab 3 7.0 (Wi-Fi) SM-T210 should be now updated with the Android 4.1.2 XXAMKF Jelly Bean official firmware. Head over to Settings >> About Phone to verify the software version running on the device.

Note: If Galaxy Tab 3 7.0 (Wi-Fi) SM-T210 stuck at booting animation after Step 10 then go to recovery mode (press and hold the Volume Up, Home and Power buttons together) and perform Wipe data/Factory Reset and Wipe Cache Partition task before selecting reboot system now function. In recovery mode use Volume keys to navigate between options and Power key to select the option. Please note, performing wiping task will erase your device internal memory data and not external SD card data.

Click here to know How to Root Galaxy Tab 3 7.0 (Wi-Fi) SM-T210/T210R running on Android 4.1.2 Jelly Bean firmware.

Read More

How to Update Galaxy Note 10.1 (Wi-Fi) N8010 with Android 4.1.2 XXUCMK2 Jelly Bean Official Firmware

Samsung has already released Android 4.1.2 Jelly Bean update with firmware build number N8010XXUCMK2 for the Wi-Fi variant of the Galaxy Note 10.1 bearing model number GT-N8010. The new official update is currently available as an Over-The-Air (OTA) update as well as through Samsung KIES.

Firmware details
PDA: N8010XXUCMK2
CSC: N8010OXACMK2
MODEM: N8010XXUCMK2
Version: Android 4.1.2
Build date: Nov 20, 2013
Regions: Germany

Samsung Galaxy Note 10.1 (Wi-Fi) N8010 users who missed the OTA update notification or unable to access the update over Samsung KIES, and those who are residing outside Germany can now download and install the same manually, using our step-by-step guide.

Pre-requisites
1. Install USB Drivers for Samsung Galaxy Note 10.1 on the computer.
2. Enable USB Debugging Mode on the device by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. The Galaxy Note 10.1 should be factory unlocked.
5. Ensure the battery of the device is charged more than 80 percent.
6. The Android 4.1.2 XXUCMK2 Jelly Bean firmware is compatible only with the Wi-Fi version of the Galaxy Note 10.1 (GT-N8010). Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy Note 10.1 by navigating to Settings >> About Phone.

Files Required
1. Android 4.1.2 XXUCMK2 Jelly Bean Firmware (Mirror Link 1, Link 2) for Galaxy Note 10.1 (Wi-Fi) N8010
2. Odin 3.07

Steps to Update Galaxy Note 10.1 (Wi-Fi) N8010 with Android 4.1.2 XXUCMK2 Jelly Bean Firmware
Step 1: Extract Firmware zip file using winrar/7zip/winzip or any other extracting tool, you will get a .tar.md5 file and some other files.
Step 2: Extract Odin zip file and you will get Odin3 v3.07.exe along with few other files.
Step 3: Switch off the Galaxy Note 10.1.
Step 4: Boot the device into Download Mode by pressing and holding Volume Down and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 5: Run Odin on the computer as an Administrator.
Step 6: Connect the Galaxy Note 10.1 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.

Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.

Step 7: Select the following files in Odin from extracted N8010XXUCMK2 firmware folder:

• Click the PDA button and select the .tar.md5 file.
• Click the Phone button and select file with MODEM in its name. Ignore if there is no such file.
• Click the CSC button and select file with CSC in its name. Ignore if there is no such file.
• Click the PIT button and select the .pit file. Ignore if there is no such file.

Step 8: In Odin, enable Auto Reboot and F. Reset Time checkboxes. Also, ensure the Re-Partition checkbox is chosen only if a .pit file was chosen in the previous step.
Step 9: Verify everything suggested in Step 7 and Step 8 is done correctly. Then hit the Start button to begin the installation process.
Step 10: Once the installation process is completed, your device will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from the computer.

Samsung Galaxy Note 10.1 (Wi-Fi) N8010 should be now updated with official Android 4.1.2 XXUCMK2 Jelly Bean. Head over to Settings >> About Phone to verify the software version running on the device.

Note: If Galaxy Note 10.1 (Wi-Fi) N8010 stuck at booting animation after Step 10 then go to recovery mode (press and hold the Volume Up and Power buttons together) and perform Wipe data/Factory Reset and Wipe Cache Partition task before selecting reboot system now function. In recovery mode use Volume keys to navigate between options and Power key to select the option. Please note, performing wiping task will erase your device internal memory data and not external SD card data.

Click here to know How to Root Galaxy Note 10.1 (Wi-Fi) N8010 running on Android 4.1.2 Jelly Bean firmware.

Read More

How to Root Galaxy Tab 3 8.0 SM-T310/T311/T315 on Android 4.2.2 Jelly Bean and Install CWM/TWRP Recovery

Samsung Galaxy Tab 3 8.0 users who wish to root and install CWM/TWRP recovery on their devices running on Android 4.2.2 Jelly Bean, may follow our step-by-step guide.

This tutorial uses ClockworkMod Recovery (CWM)/TWRP was developed and released by Senior Member of XDA-Developers, emwno. The root method compatible with the Galaxy Tab 3 8.0 with model number SM-T310 (Wi-Fi), SM-T311 (3G) and SM-T315 (LTE).

Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!

Pre-Requisites
1. Install USB Drivers for Samsung Galaxy Tab 3 8.0 on your computer.
2. Enable USB Debugging Mode on the device by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. The Galaxy Tab 3 8.0 should be factory unlocked and not locked to any particular carrier.
5. Ensure the battery of the device is charged more than 80 percent.
6. The ClockworkMod Recovery (CWM) and TWRP files works only on Samsung Galaxy Tab 3 8.0 with model number SM-T310 (Wi-Fi), SM-T311 (3G) and SM-T315 (LTE). Applying these on any incorrect variant might brick the device. Verify the model number of the Galaxy Tab 3 8.0 by selecting Settings >> About Phone.

File Required
1. CWM (CWM_T31x_r4.tar) or TWRP (TWRP_T31x_r3.tar)
2. Root Package (ROOT_SGT3_8.0.zip)
3. Odin 3.07

Steps to Install CWM/TWRP Recovery on Samsung Galaxy Tab 3 8.0
Step 1: Extract the Odin 3.07 file using winrar/7zip/winzip or any other extracting tool.
Step 2: Copy the ROOT_SGT3_8.0.zip file to the SD card of your device.
Step 3: Switch off the Galaxy Tab 3 8.0. Then boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 4: Run Odin on the computer as an Administrator.
Step 5: Connect the Galaxy Tab 3 8.0 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.

Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.

Step 6: In Odin, click the PDA button and select the CWM/TWRP .tar file. Verify that Auto Reboot and F. Reset Time checkboxes are selected. Also, ensure the Re-Partition option is NOT selected.
Step 7: Double-check and click Start button in Odin. The installation process will now begin.
Step 8: Once the installation process is completed, your device will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect it from the computer.

Steps to Root Samsung Galaxy Tab 3 8.0
Step 9: Reboot the device into CWM Recovery by pressing and holding Volume Up, Home and Power buttons together.
Step 10: In CWM Recovery, select "install zip from sdcard" and then select "choose zip from sdcard". Now, navigate to the ROOT_SGT3_8.0.zip file that you copied earlier and confirm the installation by selecting Yes.
Step 11: Once installation process is completed, return to main recovery menu and select "reboot system now".

Samsung Galaxy Tab 3 8.0 SM-T310/T311/T315 running on Android 4.2.2 Jelly Bean is now rooted successfully. You can now install any app that requires root permission. Verify the root status of the device by downloading Root Checker app from Google Play Store.

Thank's to all fellas at XDA who first tried out this rooting technique. This root method was originally posted via XDA-Developers original thread.

Click here to know How to Update Galaxy Tab 3 8.0 (LTE) SM-T315 with Android 4.2.2 XXUAMK1 Jelly Bean official firmware.

Read More

How to Root Galaxy Tab 3 10.1 (Wi-Fi) P5210 on Android 4.2.2 Jelly Bean Firmware

The Wi-Fi version of Samsung Galaxy Tab 3 10.1 (GT-P5210) was officially announced in June 2013, along with the 3G version of the Galaxy Tab 3 10.1 with model number GT-P5200. The both models comes with a Dual-Core 1.6 GHz Processor, 1 GB of RAM, 3.15 Megapixel main shooter and a 1.3 Megapixel front facing camera, and runs Android 4.2.2 Jelly Bean out of the box.

Samsung Galaxy Tab 3 10.1 (Wi-Fi) P5210 users who wish to root and install ClockworkMod Recovery (CWM) on their devices running on Android 4.2.2 Jelly Bean, may follow our step-by-step guide.

Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!

Pre-Requisites
1. Install USB Drivers for Samsung Galaxy Tab 3 10.1 on your computer.
2. Enable USB Debugging Mode on the device by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. The Galaxy Tab 3 10.1 should be factory unlocked.
5. Ensure the battery of the device is charged more than 80 percent.
6. The ClockworkMod Recovery (CWM) and Root files works only on the Wi-Fi version of Samsung Galaxy Tab 3 10.1 (GT-P5210). Applying these on any incorrect variant might brick the device. Verify the model number of the Galaxy Tab 3 10.1 by selecting Settings >> About Phone.

File Required
1. CWM Recovery (bindroid_cwm_p5210_santos10wifi.zip) (Mirror Link)
2. Root (root.zip) (Mirror Link)
3. Odin 3.07

Steps to Install CWM Recovery on Samsung Galaxy Tab 3 10.1 P5210
Step 1: Extract the bindroid_cwm_p5210_santos10wifi.zip and Odin 3.07 files using winrar/7zip/winzip or any other extracting tool.
Step 2: Copy the root.zip file to the external SD card of your device.
Step 3: Switch off the Galaxy Tab 3 10.1. Then boot the device into Download Mode by pressing and holding Volume Down and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 4: Run Odin on the computer as an Administrator.
Step 5: Connect the Galaxy Tab 3 10.1 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.

Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.

Step 6: In Odin, click the PDA button and select the recovery.tar.md5 file. Verify that F. Reset Time checkboxes are selected. Also, ensure the Auto Reboot and Re-Partition option is NOT selected.
Step 7: Double-check and click Start button in Odin. The installation process will now begin.
Step 8: Once installation process is completed, unplug the USB cable to disconnect your device from the computer.

Steps to Root Samsung Galaxy Tab 3 10.1 P5210 via CWM Recovery
Step 9: Reboot the device into CWM Recovery by pressing and holding Volume Up and Power buttons together.
Step 10: In CWM Recovery, select "install zip from sdcard" and then select "choose zip from external sdcard". Now, navigate to the root.zip file that you copied earlier and confirm the installation by selecting Yes.
Step 11: Once installation process is completed, return to main recovery menu and select "reboot system now".

Samsung Galaxy Tab 3 10.1 P5210 running on Android 4.2.2 Jelly Bean is now rooted successfully. You can now install any app that requires root permission. Verify the root status of the device by downloading Root Checker app from Google Play Store.

Thank's to all fellas at XDA who first tried out this rooting technique. This root method was originally posted via XDA-Developers original thread.

Click here to know How to Update Galaxy Tab 3 10.1 (Wi-Fi) P5210 with Android 4.2.2 XXUAMJ3 Jelly Bean official firmware.

Read More

How to Update Galaxy Tab 3 10.1 (Wi-Fi) P5210 with Android 4.2.2 XXUAMJ3 Jelly Bean Official Firmware

Samsung has now officially relled out the Android 4.2.2 Jelly Bean update with firmware build number P5210XXUAMJ3 for the Wi-Fi version of the Galaxy Tab 3 10.1 (GT-P5210) in Australia. The new official update is now available as an Over-The-Air (OTA) update as well as through Samsung KIES.

Firmware details
PDA: P5210XXUAMJ3
CSC: P5210XSAAMK1
MODEM: P5210XXUAMJ3
Version: Android 4.2.2
Build date: Oct 22, 2013
Regions: Australia

Samsung Galaxy Tab 3 10.1 (Wi-Fi) P5210 users who missed the OTA update notification or unable to access the update over Samsung KIES, may follow our step-by-step guide to install the update manually.

Pre-requisites
1. Install USB Drivers for Samsung Galaxy Tab 3 10.1 on the computer.
2. Enable USB Debugging Mode on the device by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. The Galaxy Tab 3 10.1 should be factory unlocked.
5. Ensure the battery of the device is charged more than 80 percent.
6. The Android 4.2.2 XXUAMJ3 Jelly Bean firmware is compatible only with the Wi-Fi version of the Samsung Galaxy Tab 3 10.1 (GT-P5210). Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy Tab 3 10.1 by navigating to Settings >> About Phone.

File Required
1. Android 4.2.2 XXUAMJ3 Jelly Bean Firmware (Alternative Link) for Galaxy Tab 3 10.1 (Wi-Fi) P5210
2. Odin 3.07

Steps to Update Galaxy Tab 3 10.1 (Wi-Fi) P5210 with Android 4.2.2 XXUAMJ3 Jelly Bean Firmware
Step 1: Extract Firmware zip file using winrar/7zip/winzip or any other extracting tool, you will get a .tar.md5 file and some other files.
Step 2: Extract Odin zip file and you will get Odin3 v3.07.exe along with few other files.
Step 3: Switch off Galaxy Tab 3 10.1.
Step 4: Boot the device into Download Mode by pressing and holding Volume Down and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 5: Run Odin on the computer as an Administrator.
Step 6: Connect the Galaxy Tab 3 10.1 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.

Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.

Step 7: Select the following files in Odin from extracted P5210XXUAMJ3 firmware folder:

• Click the PDA button and select the .tar.md5 file.
• Click the Phone button and select file with MODEM in its name. Ignore if there is no such file.
• Click the CSC button and select file with CSC in its name. Ignore if there is no such file.
• Click the PIT button and select the .pit file. Ignore if there is no such file.

Step 8: In Odin, enable Auto Reboot and F. Reset Time checkboxes. Also, ensure the Re-Partition checkbox is chosen only if a .pit file was chosen in the previous step.
Step 9: Verify everything suggested in Step 7 and Step 8 is done correctly. Then hit the Start button to begin the installation process.
Step 10: Once the installation process is completed, your device will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from the computer.

Samsung Galaxy Tab 3 10.1 (Wi-Fi) P5210 should be now updated with the Android 4.2.2 XXUAMJ3 Jelly Bean official firmware. Head over to Settings >> About Phone to verify the software version running on the device.

Note: If Galaxy Tab 3 10.1 (Wi-Fi) P5210 stuck at booting animation after Step 10 then go to recovery mode (press and hold the Volume Up and Power buttons together) and perform Wipe data/Factory Reset and Wipe Cache Partition task before selecting reboot system now function. In recovery mode use Volume keys to navigate between options and Power key to select the option. Please note, performing wiping task will erase your device internal memory data and not external SD card data.

Click here to know How to Root Galaxy Tab 3 10.1 (Wi-Fi) P5210 running on Android 4.2.2 Jelly Bean firmware.

Read More

How to Root Galaxy Tab 3 7.0 (Wi-Fi) SM-T210/T210R on Android 4.1.2 Jelly Bean Firmware

Announced in April 2013, Samsung Galaxy Tab 3 7.0 is now available for purchase in various countries. Followed by the market rollout, Senior XDA-Developers member gr8nole has released an easy rooting method for the Wi-Fi version of the Galaxy Tab 3 7.0 with model number SM-T210 and SM-T210R. The root method uses ClockworkMod Recovery (CWM) or TWRP which allows users to root their devices without any difficulty.

Samsung Galaxy Tab 3 7.0 (Wi-Fi) users who wish to root and install CWM/TWRP recovery on their devices running on Android 4.1.2 Jelly Bean, may follow our step-by-step guide.

Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!

Pre-Requisites
1. Install USB Drivers for Samsung Galaxy Tab 3 7.0 on your computer.
2. Enable USB Debugging Mode on the device by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. The Galaxy Tab 3 7.0 should be factory unlocked.
5. Ensure the battery of the device is charged more than 80 percent.
6. The CWM and TWRP recovery works only on the Wi-Fi version of the Samsung Galaxy Tab 3 7.0 with model number SM-T210 and SM-T210R. Applying these on any incorrect variant might brick the device. Verify the model number of the Galaxy Tab 3 7.0 by selecting Settings >> About Phone.

File Required
1. CWM or TWRP
2. Universal Root Package (Mirror Link) (android-armeabi-universal-root-signed.zip)
3. Odin 3.07

Steps to Install CWM/TWRP Recovery on Galaxy Tab 3 7.0 (Wi-Fi) SM-T210/T210R
Step 1: Extract the CWM/TWRP and Odin 3.07 files using winrar/7zip/winzip or any other extracting tool.
Step 2: Copy the android-armeabi-universal-root-signed.zip file to the external SD card of your device.
Step 3: Switch off the Galaxy Tab 3 7.0. Then boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 4: Run Odin on the computer as an Administrator.
Step 5: Connect the Galaxy Tab 3 7.0 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.

Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.

Step 6: In Odin, click the PDA button and select the recovery.tar.md5 file. Make sure that the Auto Reboot and Re-Partition options are NOT checked, only F. Reset Time option is ticked.
Step 7: Double-check and click Start button in Odin. The installation process will now begin.
Step 8: Once the installation process is completed, you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect the device from the computer.

Steps to Root Galaxy Tab 3 7.0 (Wi-Fi) SM-T210/T210R
Step 9: Boot the device into CWM recovery by pressing and holding Volume Up, Home and Power buttons together.
Step 10: In CWM recovery, select "install zip from sdcard" and then select "choose zip from external sdcard". Now, navigate to the android-armeabi-universal-root-signed.zip file that you copied earlier and confirm the installation by selecting Yes.
Step 11: Once installation process is completed, return to main recovery menu and select "reboot system now".

Samsung Galaxy Tab 3 7.0 (Wi-Fi) SM-T210/T210R running on Android 4.1.2 Jelly Bean is now rooted successfully. You can now install any app that requires root permission. Verify the root status of the device by downloading Root Checker app from Google Play Store.

Thank's to all fellas at XDA who first tried out this rooting technique. This root method was originally posted via XDA-Developers original thread.

Click here to know How to Update Galaxy Tab 3 7.0 (Wi-Fi) SM-T210 with Android 4.1.2 XXAMK5 Jelly Bean official firmware.

Read More

How to Update Galaxy Tab 2 10.1 (Wi-Fi) P5110 with Android 4.2.2 XXDMI1 Jelly Bean Official Firmware

Samsung has just started to roll out the Android 4.2.2 Jelly Bean update with base firmware XXDMI1 for the Wi-Fi version of the Galaxy Tab 2 10.1 (GT-P5110) in Germany. The new official update is currently available as an Over-The-Air (OTA) update as well as through Samsung KIES.

This update bring a host of new features such as lockscreen widgets, Daydream screensaver mode, dedicated toggles page in the status bar, and more, the update includes stability improvements and a few new custom Samsung features that are found on newer devices like the Galaxy S4.

Firmware details
PDA: P5110XXDMI1
CSC: P5110DBTDMJ1
MODEM: P5110XXDMI1
Version: Android 4.2.2
Build date: Sep 18, 2013
Regions: Germany, Italy, Slovakia, Baltic, Nordic countries

Samsung Galaxy Tab 2 10.1 (Wi-Fi) P5110 users who missed the OTA update notification or unable to access the update over Samsung KIES, and those who are residing outside the supported regions can now download and install the same manually, using our step-by-step guide.

Pre-requisites
1. Install USB Drivers for Samsung Galaxy Tab 2 10.1 on the computer.
2. Enable USB Debugging Mode on the device by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. The Galaxy Tab 2 10.1 should be factory unlocked and not locked to any particular carrier.
5. Ensure the battery of the device is charged more than 80 percent.
6. The Android 4.2.2 XXDMI1 Jelly Bean firmware is compatible only with the Wi-Fi version of Samsung Galaxy Tab 2 10.1 with model number P5110. Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy Tab 2 10.1 by navigating to Settings >> About Phone.

File Required
1. Android 4.2.2 XXDMI1 Jelly Bean Firmware (Alternative Link)
2. Odin 3.07

Steps to Update Galaxy Tab 2 10.1 (Wi-Fi) P5110 with Android 4.2.2 XXDMI1 Jelly Bean Firmware
Step 1: Extract Firmware zip file using winrar/7zip/winzip or any other extracting tool, you will get a .tar.md5 file and some other files.
Step 2: Extract Odin zip file and you will get Odin3 v3.07.exe along with few other files.
Step 3: Switch off Galaxy Tab 2 10.1.
Step 4: Boot the device into Download Mode by pressing and holding Volume Down and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 5: Run Odin on the computer as an Administrator.
Step 6: Connect the Galaxy Tab 2 10.1 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.

Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.

Step 7: Select the following files in Odin from extracted P5110XXDMI1 firmware folder:

• Click the PDA button and select the .tar.md5 file.
• Click the Phone button and select file with MODEM in its name. Ignore if there is no such file.
• Click the CSC button and select file with CSC in its name. Ignore if there is no such file.
• Click the PIT button and select the .pit file. Ignore if there is no such file.

Step 8: In Odin, enable Auto Reboot and F. Reset Time checkboxes. Also, ensure the Re-Partition checkbox is chosen only if a .pit file was chosen in the previous step.
Step 9: Verify everything suggested in Step 7 and Step 8 is done correctly. Then hit the Start button to begin the installation process.
Step 10: Once the installation process is completed, your device will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from the computer.

Samsung Galaxy Tab 2 10.1 (Wi-Fi) P5110 should be now updated with official Android 4.2.2 XXDMI1 Jelly Bean. Head over to Settings >> About Phone to verify the software version running on the device.

Note: If Galaxy Tab 2 10.1 (Wi-Fi) P5110 stuck at booting animation after Step 10 then go to recovery mode (press and hold the Volume Up and Power buttons together) and perform Wipe data/Factory Reset and Wipe Cache Partition task before selecting reboot system now function. In recovery mode use Volume keys to navigate between options and Power key to select the option. Please note, performing wiping task will erase your device internal memory data and not external SD card data.

Click here to know How to Root Galaxy Tab 2 10.1 (Wi-Fi) P5110 running on Android 4.2.2 Jelly Bean firmware.

Read More

How to Root Nexus 7 (2013) Wi-Fi on Android 4.4 KRT16O KitKat and Install CWM/TWRP Recovery

Google has just started to roll out the Android 4.4 Kitkat official update with build version KRT16O for the Wi-Fi version of the second generation Nexus 7 also known as Nexus 7 2013. The new official update is currently available as an Over-The-Air (OTA) update.

Nexus 7 (2013) Wi-Fi users who have already updated their devices with Android 4.4 KRT16O KitKat, may root their devices using the tutorial below.

Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!

Pre-requisites
1. Make a backup of all your important data before following the guide.
2. Enable USB Debugging Mode on the tablet.
3. The Nexus 7 bootloader should be unlocked.
4. Ensure the battery of the tablet is charged more than 80 per cent.
5. The CWM/TWRP Recovery and SuperSU files compatible only with the Wi-Fi version of Nexus 7 (2013) running on Android 4.4 KRT16O KitKat. Applying these on any incorrect variant will brick the device. Verify the model number of the Nexus 7 by navigating to Settings >> About Phone.

File Required
1. Android SDK
2. Fastboot
3. CWM or TWRP Recovery
4. SuperSU

Steps to Root Nexus 7 (2013) Wi-Fi Running on Android 4.4 KitKat and Install CWM/TWRP Recovery
Step 1: Install the Android SDK. The package includes the necessary drivers for connecting your tablet to the computer, which is mandatory for the rooting process.
Step 2: Extract the Fastboot .zip file using winrar/7zip/winzip or any other extracting tool and copy it to the android-sdk-windowsplatform-tools directory on the computer.
Step 4: Copy the CWM or TWRP .img file to the android-sdk-windowsplatform-tools directory on the computer.
Step 5: Connect the Nexus 7 to the computer using USB cable. Then copy the SuperSU .zip file to the SD card of your tablet.
Step 6: Switch off the Nexus 7. Then boot the device into fastboot mode by pressing and holding Volume Up, Volume Down, and Power buttons together.
Step 7: Navigate to android-sdk-windowsplatform-tools directory and open Command Prompt (Shift + Right-click >> Open Command Prompt). Then run the following command:

fastboot flash recovery recovery-clockwork-touch-6.0.4.3-grouper.img

Step 8: Once completed, choose RECOVERY from the Fastboot menu and enter Recovery Mode.
Step 9: In CWM Recovery, select "install zip from sdcard" and then select "choose zip from sdcard". Now, navigate to the SuperSU .zip file that you copied earlier and confirm the installation by selecting Yes.
Step 10: Once the installation process completes, return to main recovery menu and select "reboot system now".

Nexus 7 (2013) Wi-Fi running on Android 4.4 KRT16O KitKat is now rooted successfully. Open the app drawer of the Nexus 7 and look for an app called SuperSU. Verify the root status of the device by downloading Root Checker app from Google Play Store.

Read More

How to Root Nexus 7 (2012) Wi-Fi on Android 4.4 KRT16O KitKat and Install CWM/TWRP Recovery

Google has recently released the Android 4.4 Kitkat Over-The-Air (OTA) update with build version KRT16O for the Wi-Fi version of Nexus 7 (2012).

Nexus 7 (2012) Wi-Fi users who have already updated their devices with Android 4.4 KRT16O KitKat, may root their devices using the tutorial below.

Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!

Pre-requisites
1. Make a backup of all your important data before following the guide.
2. Enable USB Debugging Mode on the tablet.
3. The Nexus 7 bootloader should be unlocked.
4. Ensure the battery of the tablet is charged more than 80 per cent.
5. The CWM/TWRP Recovery and SuperSU files compatible only with the Wi-Fi version of Nexus 7 (2012) running on Android 4.4 KRT16O KitKat. Applying these on any incorrect variant will brick the device. Verify the model number of the Nexus 7 by navigating to Settings >> About Phone.

File Required
1. Android SDK
2. Fastboot
3. CWM or TWRP Recovery
4. SuperSU

Steps to Root Nexus 7 (2012) Wi-Fi Running on Android 4.4 KitKat and Install CWM/TWRP Recovery
Step 1: Install the Android SDK. The package includes the necessary drivers for connecting your tablet to the computer, which is mandatory for the rooting process.
Step 2: Extract the Fastboot .zip file using winrar/7zip/winzip or any other extracting tool and copy it to the android-sdk-windowsplatform-tools directory on the computer.
Step 4: Copy the CWM or TWRP .img file to the android-sdk-windowsplatform-tools directory on the computer.
Step 5: Connect the Nexus 7 to the computer using USB cable. Then copy the SuperSU .zip file to the SD card of your tablet.
Step 6: Switch off the Nexus 7. Then boot the device into fastboot mode by pressing and holding Volume Up, Volume Down, and Power buttons together.
Step 7: Navigate to android-sdk-windowsplatform-tools directory and open Command Prompt (Shift + Right-click >> Open Command Prompt). Then run the following command:

fastboot flash recovery recovery-clockwork-touch-6.0.4.3-grouper.img

Step 8: Once completed, choose RECOVERY from the Fastboot menu and enter Recovery Mode.
Step 9: In CWM Recovery, select "install zip from sdcard" and then select "choose zip from sdcard". Now, navigate to the SuperSU .zip file that you copied earlier and confirm the installation by selecting Yes.
Step 10: Once the installation process completes, return to main recovery menu and select "reboot system now".

Nexus 7 (2012) Wi-Fi running on Android 4.4 KRT16O KitKat is now rooted successfully. Open the app drawer of the Nexus 7 and look for an app called SuperSU. Verify the root status of the device by downloading Root Checker app from Google Play Store.

Read More

How to Root Galaxy Tab 2 10.1 (Wi-Fi) P5110 on Android 4.2.2 Jelly Bean Firmware

The Wi-Fi version of Samsung Galaxy Tab 2 10.1 with model number GT-P5110 has recently received the Android 4.2.2 Jelly Bean update. The new official firmware update is currently available as an Over-The-Air (OTA) update as well as through Samsung KIES.

Samsung Galaxy Tab 2 10.1 (Wi-Fi) P5110 users who have already updated their devices with Android 4.2.2 Jelly Bean, may root their devices using the tutorial below.

This tutorial uses CF-Auto-Root file released by recognised XDA-Developers, Chainfire. The CF-Auto-Root file allowing Galaxy Tab 2 10.1 users to root their devices easily without depending on the firmware. It completely supports Android 4.2.2 Jelly Bean and future firmware as well. Head over to the CF-Auto-Root main thread to learn more about the root method.

Note: Using this root increases your flash counter. The flash counter keeps track of how many custom firmwares you have flashed, as this voids warranty. Triangle Away can be used to reset the flash counter after installing CF-Auto-Root.

Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!

Pre-requisites
1. Install USB Drivers for Samsung Galaxy Tab 2 10.1 on the computer.
2. Enable USB Debugging Mode on the device by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. The Galaxy Tab 2 10.1 should be factory unlocked.
5. Ensure the battery of the device is charged more than 80 percent.
6. The CF-Auto-Root file works only on the Wi-Fi version of Samsung Galaxy Tab 2 10.1 with model number (GT-P5110). Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy Tab 2 10.1 by navigating to Settings >> About Phone.

File Required
1. CF-Auto-Root for Galaxy Tab 2 10.1 (Wi-Fi) P5110 (CF-Auto-Root-espresso10wifi-espresso10wifixx-gtp5110.zip)
2. Odin 3.07

Steps to Root Galaxy Tab 2 10.1 (Wi-Fi) P5110 Running on Android 4.2.2 Jelly Bean Firmware
Step 1: Extract CF-Auto-Root and Odin 3.07 files using winrar/7zip/winzip or any other extracting tool.
Step 2: Switch off the Galaxy Tab 2 10.1. Then boot the device into Download Mode by pressing and holding Volume Down and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 3: Launch Odin on the computer as an Administrator.
Step 4: Connect the Galaxy Tab 2 10.1 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.

Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.

Step 5: In Odin, click the PDA button and select the CF-Auto-Root-espresso10wifi-espresso10wifixx-gtp5110.tar.md5 file.
Step 6: Verify that Auto Reboot and F.Reset Time checkboxes are selected in Odin. Also, ensure the Re-Partition option is not selected.
Step 7: Double-check and click Start button in Odin. The installation process will now begin.
Step 8: Once the installation process is completed, your device will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from computer.

Samsung Galaxy Tab 2 10.1 (Wi-Fi) P5110 running on Android 4.2.2 Jelly Bean firmware is now rooted successfully. You can now install any app that requires root permission. Verify the root status of the device by downloading Root Checker app from Google Play Store.

Thank's to all fellas at XDA who first tried out this rooting technique. This method was originally posted via XDA-Developers original thread.

Click here to know How to Update Galaxy Tab 2 10.1 (Wi-Fi) P5110 with official Android 4.2.2 Jelly Bean firmware.

Read More

How to Update Galaxy Tab 2 10.1 (Wi-Fi) P5110 with Android 4.2.2 XXDMH2 Jelly Bean Official Firmware

Following the international 3G version of Galaxy Tab 2 10.1 (GT-P5100), Samsung has recently released the Android 4.2.2 Jelly Bean update for the Wi-Fi version of Galaxy Tab 2 10.1 with model number GT-P5110. The new official firmware is currently available in Australia as an Over-The-Air (OTA) update as well as through Samsung KIES.

Firmware details
PDA: P5110XXDMH2
CSC: P5110XSADMH1
MODEM: P5110XXDMH2
Version: Android 4.2.2
Build date: Aug 13, 2013
Regions: Australia

Samsung Galaxy Tab 2 10.1 (Wi-Fi) P5110 users who missed the OTA update notification or unable to access the update over Samsung KIES, and those who are residing outside Australia can now download and install the same manually, using our step-by-step guide.

Pre-requisites
1. Install USB Drivers for Samsung Galaxy Tab 2 10.1 on the computer.
2. Enable USB Debugging Mode on the device by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. The Galaxy Tab 2 10.1 should be factory unlocked.
5. Ensure the battery of the device is charged more than 80 percent.
6. The Android 4.2.2 XXDMH2 Jelly Bean firmware is compatible only with the Wi-Fi version of Samsung Galaxy Tab 2 10.1 with model number P5110. Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy Tab 2 10.1 by navigating to Settings >> About Phone.

File Required
1. Android 4.2.2 XXDMH2 Jelly Bean Firmware (Alternative Link)
2. Odin 3.07

Steps to Update Galaxy Tab 2 10.1 (Wi-Fi) P5110 with Android 4.2.2 XXDMH2 Jelly Bean Firmware
Step 1: Extract Firmware zip file using winrar/7zip/winzip or any other extracting tool, you will get a .tar.md5 file and some other files.
Step 2: Extract Odin zip file and you will get Odin3 v3.07.exe along with few other files.
Step 3: Switch off Galaxy Tab 2 10.1.
Step 4: Boot the device into Download Mode by pressing and holding Volume Down and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 5: Run Odin on the computer as an Administrator.
Step 6: Connect the Galaxy Tab 2 10.1 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.

Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.

Step 7: Select the following files in Odin from extracted P5110XXDMH2 firmware folder:

• Click the PDA button and select the .tar.md5 file.
• Click the Phone button and select file with MODEM in its name. Ignore if there is no such file.
• Click the CSC button and select file with CSC in its name. Ignore if there is no such file.
• Click the PIT button and select the .pit file. Ignore if there is no such file.

Step 8: In Odin, enable Auto Reboot and F. Reset Time checkboxes. Also, ensure the Re-Partition checkbox is chosen only if a .pit file was chosen in the previous step.
Step 9: Verify everything suggested in Step 7 and Step 8 is done correctly. Then hit the Start button to begin the installation process.
Step 10: Once the installation process is completed, your device will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from the computer.

Samsung Galaxy Tab 2 10.1 (Wi-Fi) P5110 should be now updated with official Android 4.2.2 XXDMH2 Jelly Bean. Head over to Settings >> About Phone to verify the software version running on the device.

Note: If Galaxy Tab 2 10.1 (Wi-Fi) P5110 stuck at booting animation after Step 10 then go to recovery mode (press and hold the Volume Up and Power buttons together) and perform Wipe data/Factory Reset and Wipe Cache Partition task before selecting reboot system now function. In recovery mode use Volume keys to navigate between options and Power key to select the option. Please note, performing wiping task will erase your device internal memory data and not external SD card data.

Click here to know How to Root Galaxy Tab 2 10.1 (Wi-Fi) P5110 running on Android 4.2.2 Jelly Bean firmware.

Read More

How to Root Galaxy Note 8.0 (Wi-Fi) N5110 on Android 4.2.2 Jelly Bean Firmware

Samsung has released the Android 4.2.2 Jelly Bean update for the Wi-Fi version of Galaxy Note 8.0 (GT-N5110). The new official firmware is now available as an Over-The-Air (OTA) update as well as through Samsung KIES.

Samsung Galaxy Note 8.0 (Wi-Fi) N5110 users who have already updated their devices with Android 4.2.2 Jelly Bean, may root their devices using the tutorial below.

This tutorial uses CF-Auto-Root file released by recognised XDA-Developers, Chainfire. The CF-Auto-Root file allowing Galaxy Note 8.0 (Wi-Fi) users to root their devices easily without depending on the firmware. It completely supports Android 4.2.2 Jelly Bean and future firmware as well. Head over to the CF-Auto-Root main thread to learn more about the root method.

Note: Using this root increases your flash counter. The flash counter keeps track of how many custom firmwares you have flashed, as this voids warranty. Triangle Away can be used to reset the flash counter after installing CF-Auto-Root.

Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!

Pre-requisites
1. Install USB Driver for Samsung Galaxy Note 8.0 on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. The Galaxy Note 8.0 should be factory unlocked.
5. Ensure the battery of the phone is charged more than 80 percent.
6. The CF-Auto-Root file works only on the Wi-Fi version of Samsung Galaxy Note 8.0 (GT-N5110). Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy Note 8.0 by navigating to Settings >> About Phone.

File Required
1. CF-Auto-Root for Galaxy Note 8.0 (Wi-Fi) N5110 (CF-Auto-Root-konawifi-konawifixx-gtn5110.zip)
2. Odin 3.07

Steps to Root Galaxy Note 8.0 (Wi-Fi) N5110 Running on Android 4.2.2 Jelly Bean Firmware
Step 1: Extract CF-Auto-Root and Odin 3.07 files using winrar/7zip/winzip or any other extracting tool.
Step 2: Switch off the Galaxy Note 8.0. Then boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 3: Launch Odin on the computer as an Administrator.
Step 4: Connect the Galaxy Note 8.0 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.

Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.

Step 5: In Odin, click the PDA button and select the CF-Auto-Root-konawifi-konawifixx-gtn5110.tar.md5 file.
Step 6: Verify that Auto Reboot and F.Reset Time checkboxes are selected in Odin. Also, ensure the Re-Partition option is NOT selected.
Step 7: Double-check and click Start button in Odin. The installation process will now begin.
Step 8: Once the installation process is completed, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from the computer.

Samsung Galaxy Note 8.0 (Wi-Fi) N5110 running on Android 4.2.2 Jelly Bean firmware is now rooted successfully. You can now install any app that requires root permission. Verify the root status of the device by downloading Root Checker app from Google Play Store.

Thank's to all fellas at XDA who first tried out this rooting technique. This method was originally posted via XDA-Developers original thread.

Click here to know How to Update Galaxy Note 8.0 (Wi-Fi) N5110 with official Android 4.2.2 Jelly Bean firmware.

Read More

How to Update Galaxy Note 8.0 (Wi-Fi) N5110 with Android 4.2.2 XXCMH3 Jelly Bean Official Firmware

Samsung has recently released the Android 4.2.2 Jelly Bean update for the Wi-Fi version of Galaxy Note 8.0 bearing model number GT-N5110. The new official firmware is now available as an Over-The-Air (OTA) update as well as through Samsung KIES. This update brings a host of bug-fixes and feature enhancements over its previous build.

Firmware details
PDA: N5110XXCMH3
CSC: N5110OXACMH3
MODEM: N5110XXCMH3
Version: Android 4.2.2
Build date: Aug 23, 2013
Regions: United Kingdom

Samsung Galaxy Note 8.0 (Wi-Fi) N5110 users who missed the OTA update notification or unable to access the update over Samsung KIES, may follow our step-by-step guide to install the update manually.

Pre-requisites
1. Install USB Drivers for Samsung Galaxy Note 8.0 on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. The Galaxy Note 8.0 should be factory unlocked.
5. Ensure the battery of the phone is charged more than 80 percent.
6. The Android 4.2.2 XXCMH3 Jelly Bean firmware is compatible only with the Wi-Fi version of Samsung Galaxy Note 8.0 (GT-N5110). Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy Note 8.0 by navigating to Settings >> About Phone.

File Required
1. Android 4.2.2 XXCMH3 Jelly Bean Firmware (Alternative Link)
2. Odin 3.07

Steps to Update Galaxy Note 8.0 (Wi-Fi) N5110 with Android 4.2.2 XXCMH3 Jelly Bean Firmware
Step 1: Extract Firmware zip file using winrar/7zip/winzip or any other extracting tool, you will get a .tar.md5 file and some other files.
Step 2: Extract Odin zip file and you will get Odin3 v3.07.exe along with few other files.
Step 3: Switch off the Galaxy Note 8.0.
Step 4: Boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 5: Run Odin on the computer as an Administrator.
Step 6: Connect the Galaxy Note 8.0 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.

Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.

Step 7: Select the following files in Odin from extracted N5110XXCMH3 firmware folder:

• Click the PDA button and select the .tar.md5 file.
• Click the Phone button and select file with MODEM in its name. Ignore if there is no such file.
• Click the CSC button and select file with CSC in its name. Ignore if there is no such file.
• Click the PIT button and select the .pit file. Ignore if there is no such file.

Step 8: In Odin, enable Auto Reboot and F. Reset Time checkboxes. Also, ensure the Re-Partition checkbox is chosen only if a .pit file was chosen in the previous step.
Step 9: Verify everything suggested in Step 7 and Step 8 is done correctly. Then hit the Start button to begin the installation process.
Step 10: Once the installation process is completed, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from computer.

Samsung Galaxy Note 8.0 (Wi-Fi) N5110 should be now updated with official Android 4.2.2 XXCMH3 Jelly Bean. Head over to Settings >> About Phone to verify the software version running on the device.

Note: If Galaxy Note 8.0 (Wi-Fi) N5110 stuck at booting animation after Step 10 then go to recovery mode (press and hold the Volume Up, Home and Power buttons together) and perform Wipe data/Factory Reset and Wipe Cache Partition task before selecting reboot system now function. In recovery mode use Volume keys to navigate between options and Power key to select the option. Please note, performing wiping task will erase your device internal memory data and not external SD card data.

Click here to know How to Root Galaxy Note 8.0 (Wi-Fi) N5110 running on Android 4.2.2 Jelly Bean firmware.

Read More

How to Root Galaxy Tab 7.0 Plus (Wi-Fi) P6210 on Android 4.1.2 Jelly Bean Firmware

Samsung has released the Android 4.1.2 Jelly Bean update for the Wi-Fi version of Galaxy Tab 7.0 Plus with model number GT-P6210. The new official firmware is now available as an Over-The-Air (OTA) update as well as through Samsung KIES.

Samsung Galaxy Tab 7.0 Plus (Wi-Fi) P6210 users who have already updated their devices with Android 4.1.2 Jelly Bean, may root their devices using the tutorial below.

Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!

Pre-Requisites
1. Install USB Drivers for Samsung Galaxy Tab 7.0 Plus on your computer.
2. Enable USB Debugging Mode on the device by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. The Galaxy Tab 7.0 Plus should be factory unlocked and not locked to any particular carrier.
5. Ensure the battery of the device is charged more than 80 percent.
6. The ClockworkMod Recovery (CWM) and SuperSU files works only on Samsung Galaxy Tab 7.0 Plus (Wi-Fi) P6210. Applying these on any incorrect variant might brick the device. Verify the model number of the Galaxy Tab 7.0 Plus by selecting Settings >> About Phone.

File Required
1. Odin3_v3.07.rar
2. p6210-clockworkmod-6.0.2.7.zip
3. CWM-SuperSU-v0.94.zip

Steps to Install CWM Recovery on Samsung Galaxy Tab 7.0 Plus (Wi-Fi) P6210
Step 1: Extract Odin3_v3.07.rar and p6210-clockworkmod-6.0.2.7.zip files using winrar/7zip/winzip or any other extracting tool.
Step 2: Copy CWM-SuperSU-v0.94.zip file to the external SD card of tablet.
Step 3: Switch off the Galaxy Tab 7.0 Plus. Then boot the device into Download Mode by pressing and holding Volume Down and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 4: Run Odin on the computer as an Administrator.
Step 5: Connect the Galaxy Tab 7.0 Plus to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.

Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.

Step 6: In Odin, click the PDA and select the recovery.tar.md5 file. Verify that Auto Reboot and F.Reset Time checkboxes are selected. Also, ensure the Re-Partition option is NOT selected.
Step 7: Double-check and click Start button in Odin. The installation process will now begin.
Step 8: Once installation process is completed, the device will reboot automatically. After the home screen appears, unplug USB cable to disconnect it from the computer.

Steps to Root Galaxy Tab 7.0 Plus (Wi-Fi) P6210 by Installing SuperSU via CWM Recovery
Step 9: Reboot the device into CWM Recovery by pressing and holding Volume Up and Power buttons together.
Step 10: In CWM Recovery, select install zip from sdcard and then select choose zip from external sdcard. Now, navigate to the CWM-SuperSU-v0.94.zip file that you copied earlier and confirm the installation by selecting Yes.
Step 11: Once installation process is completed, return to main recovery menu and select reboot system now.

Samsung Galaxy Tab 7.0 Plus (Wi-Fi) P6210 running on Android 4.1.2 Jelly Bean is now rooted successfully. You can now install any app that requires root permission. Verify the root status of the device by downloading Root Checker app from Google Play Store.

Thank's to all fellas at XDA who first tried out this rooting technique. This root method was originally posted via XDA-Developers original thread.

Click here to know How to Update Galaxy Tab 7.0 Plus (Wi-Fi) P6210 with official Android 4.1.2 Jelly Bean firmware.

Read More