How to Root Nexus 10 on Android 4.4.1 KOT49E KitKat and Install CWM/TWRP Recovery

Google Nexus 10 has just started receiving the latest Android 4.4.1 Kitkat OTA update with build version KOT49E.

Note: You can manually download the OTA for the Nexus 10 directly from Google's Update Servers and follow our step-by-step guide to install the update manually.

Nexus 10 users who have already updated their devices with Android 4.4.1 KOT49E KitKat, may root their devices using the tutorial below.

Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!

Pre-requisites
1. Make a backup of all your important data before following the guide.
2. Enable USB Debugging Mode on the tablet. Go to Settings >> About Phone. Tap on Build Number several times till the message shows "You are now a Developer". Exit from "About Phone" and find the "Developer Options" settings. Enable USB debugging.
3. The Nexus 10 bootloader should be unlocked.
4. Ensure the battery of the tablet is charged more than 80 percent.
5. The CWM/TWRP Recovery and SuperSU files compatible only with the Nexus 10. Applying these on any incorrect variant will brick the device. Verify the model number of the Nexus 10 by navigating to Settings >> About Phone.

File Required
1. Android SDK
2. Fastboot
3. CWM or TWRP Recovery
4. SuperSU (UPDATE-SuperSU-v1.75.zip) or the latest version

Steps to Root Nexus 10 Running on Android 4.4.1 KOT49E KitKat and Install CWM/TWRP Recovery
Step 1: Install the Android SDK. The package includes the necessary drivers for connecting your tablet to the computer, which is mandatory for the rooting process.
Step 2: Extract the Fastboot .zip file using winrar/7zip/winzip or any other extracting tool and copy it to the android-sdk-windowsplatform-tools directory on the computer.
Step 4: Copy the CWM or TWRP .img file to the android-sdk-windowsplatform-tools directory on the computer.
Step 5: Connect the Nexus 10 to the computer using USB cable. Then copy the SuperSU .zip file to the SD card of your tablet.
Step 6: Switch off the Nexus 10. Then boot the device into fastboot mode by pressing and holding Volume Up, Volume Down, and Power buttons together.
Step 7: Navigate to android-sdk-windowsplatform-tools directory and open Command Prompt (Shift + Right-click >> Open Command Prompt). Then run the following command:

fastboot flash recovery recovery-clockwork-touch-6.0.4.3-manta.img

Step 8: Once completed, choose RECOVERY from the Fastboot menu and enter Recovery Mode.
Step 9: In CWM Recovery, select "install zip from sdcard" and then select "choose zip from sdcard". Now, navigate to the SuperSU .zip file that you copied earlier and confirm the installation by selecting Yes.
Step 10: Once the installation process completes, return to main recovery menu and select "reboot system now".

Nexus 10 running on Android 4.4.1 KOT49E KitKat is now rooted successfully. Open the app drawer of the Nexus 10 and look for an app called SuperSU. Verify the root status of the device by downloading Root Checker app from Google Play Store.

Click here to know How to Update Nexus 10 with Android 4.4.1 KOT49E KitKat.

Read More

How to Root Nexus 7 (2013) Wi-Fi on Android 4.4.1 KOT49E KitKat and Install CWM/TWRP Recovery

Google has just released Android 4.4.1 Kitkat OTA update with build version KOT49E for the Wi-Fi version of the Nexus 7 (2013).

Note: You can manually download the OTA for the Nexus 7 (2013) Wi-Fi directly from Google's Update Servers and follow our step-by-step guide to install the update manually.

Nexus 7 (2013) Wi-Fi users who have already updated their devices with Android 4.4.1 KOT49E KitKat, may root their devices using the tutorial below.

Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!

Pre-requisites
1. Make a backup of all your important data before following the guide.
2. Enable USB Debugging Mode on the tablet. Go to Settings >> About Phone. Tap on Build Number several times till the message shows "You are now a Developer". Exit from "About Phone" and find the "Developer Options" settings. Enable USB debugging.
3. The Nexus 7 bootloader should be unlocked.
4. Ensure the battery of the tablet is charged more than 80 percent.
5. The CWM/TWRP Recovery and SuperSU files compatible only with the Wi-Fi version of Nexus 7 (2013). Applying these on any incorrect variant will brick the device. Verify the model number of the Nexus 7 by navigating to Settings >> About Phone.

File Required
1. Android SDK
2. Fastboot
3. CWM or TWRP Recovery
4. SuperSU (UPDATE-SuperSU-v1.75.zip) or the latest version

Steps to Root Nexus 7 (2013) Wi-Fi Running on Android 4.4.1 KOT49E KitKat and Install CWM/TWRP Recovery
Step 1: Install the Android SDK. The package includes the necessary drivers for connecting your tablet to the computer, which is mandatory for the rooting process.
Step 2: Extract the Fastboot .zip file using winrar/7zip/winzip or any other extracting tool and copy it to the android-sdk-windowsplatform-tools directory on the computer.
Step 4: Copy the CWM or TWRP .img file to the android-sdk-windowsplatform-tools directory on the computer.
Step 5: Connect the Nexus 7 to the computer using USB cable. Then copy the SuperSU .zip file to the SD card of your tablet.
Step 6: Switch off the Nexus 7. Then boot the device into fastboot mode by pressing and holding Volume Up, Volume Down, and Power buttons together.
Step 7: Navigate to android-sdk-windowsplatform-tools directory and open Command Prompt (Shift + Right-click >> Open Command Prompt). Then run the following command:

fastboot flash recovery recovery-clockwork-touch-6.0.4.3-grouper.img

Step 8: Once completed, choose RECOVERY from the Fastboot menu and enter Recovery Mode.
Step 9: In CWM Recovery, select "install zip from sdcard" and then select "choose zip from sdcard". Now, navigate to the SuperSU .zip file that you copied earlier and confirm the installation by selecting Yes.
Step 10: Once the installation process completes, return to main recovery menu and select "reboot system now".

Nexus 7 (2013) Wi-Fi running on Android 4.4.1 KOT49E KitKat is now rooted successfully. Open the app drawer of the Nexus 7 and look for an app called SuperSU. Verify the root status of the device by downloading Root Checker app from Google Play Store.

Click here to know How to Update Nexus 7 (2013) Wi-Fi with Android 4.4.1 KOT49E KitKat.

Read More

How to Root Nexus 4 on Android 4.4.1 KOT49E KitKat and Install CWM/TWRP Recovery

Google Nexus 4 has already received the Android 4.4.1 KitKat Over-The-Air (OTA) update with build version KOT49E.

Note: You can manually download the OTA for the Nexus 4 directly from Google's Update Servers and follow our step-by-step guide to install the update manually.

Nexus 4 users who have already updated their devices with Android 4.4.1 KOT49E KitKat, may root their devices using the tutorial below.

Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!

Pre-requisites
1. Make a backup of all your important data before following the guide.
2. Enable USB Debugging Mode on the phone. Go to Settings >> About Phone. Tap on Build Number several times till the message shows "You are now a Developer". Exit from "About Phone" and find the "Developer Options" settings. Enable USB debugging.
3. The Nexus 4 bootloader should be unlocked.
4. Ensure the battery of the phone is charged more than 80 percent.
5. The CWM/TWRP Recovery and SuperSU files compatible only with the Nexus 4. Applying these on any incorrect variant will brick the device. Verify the model number of the Nexus 4 by navigating to Settings >> About Phone.

Files Required
1. Android SDK
2. Fastboot
3. CWM or TWRP Recovery
4. SuperSU (UPDATE-SuperSU-v1.75.zip) or the latest version

Steps to Root Nexus 4 Running on Android 4.4.1 KOT49E KitKat and Install CWM/TWRP Recovery
Step 1: Install the Android SDK. The package includes the necessary drivers for connecting your Nexus phone to the computer, which is mandatory for the rooting process.
Step 2: Extract the Fastboot .zip file using winrar/7zip/winzip or any other extracting tool and copy it to the android-sdk-windowsplatform-tools directory on the computer.
Step 4: Copy the CWM or TWRP .img file to the android-sdk-windowsplatform-tools directory on the computer.
Step 5: Connect the Nexus 4 to the computer using USB cable. Then copy the SuperSU .zip file to the SD card of your phone.
Step 6: Switch off the Nexus 4. Then boot the device into fastboot mode by pressing and holding Volume Up, Volume Down, and Power buttons together.
Step 7: Navigate to android-sdk-windowsplatform-tools directory and open Command Prompt (Shift + Right-click >> Open Command Prompt). Then run the following command:

fastboot flash recovery recovery-clockwork-touch-6.0.4.3-mako.img

Step 8: Once completed, choose RECOVERY from the Fastboot menu and enter Recovery Mode.
Step 9: In CWM Recovery, select "install zip from sdcard" and then select "choose zip from sdcard". Now, navigate to the SuperSU .zip file that you copied earlier and confirm the installation by selecting Yes.
Step 10: Once the installation process completes, return to main recovery menu and select "reboot system now".

Nexus 4 running on Android 4.4.1 KOT49E KitKat is now rooted successfully. Open the app drawer of the Nexus 4 and look for an app called SuperSU. Verify the root status of the device by downloading Root Checker app from Google Play Store.

Thank's to all fellas at XDA who first tried out this rooting technique. This method was originally posted via XDA-Developer original thread.

Click here to know How to Update Nexus 4 with Android 4.4.1 KOT49E KitKat.

Read More

How to Root Nexus 7 (2013) Mobile on Android 4.4.1 KOT49E KitKat and Install CWM/TWRP Recovery

Google has just started rolling out Android 4.4.1 Kitkat update with build version KOT49E for the LTE version of the Nexus 7 (2013). The new official update is currently available as an Over-The-Air (OTA) update.

Note: You can manually download the OTA for the Nexus 7 (2013) LTE directly from Google's Update Servers and follow our step-by-step guide to install the update manually.

Nexus 7 (2013) LTE users who have already updated their devices with Android 4.4.1 KOT49E KitKat, may root their devices using the tutorial below.

Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!

Pre-requisites
1. Make a backup of all your important data before following the guide.
2. Enable USB Debugging Mode on the tablet. Go to Settings >> About Phone. Tap on Build Number several times till the message shows "You are now a Developer". Exit from "About Phone" and find the "Developer Options" settings. Enable USB debugging.
3. The Nexus 7 bootloader should be unlocked.
4. Ensure the battery of the tablet is charged more than 80 percent.
5. The CWM/TWRP Recovery and SuperSU files compatible only with the LTE version of Nexus 7 (2013). Applying these on any incorrect variant will brick the device. Verify the model number of the Nexus 7 by navigating to Settings >> About Phone.

Files Required
1. Android SDK
2. Fastboot
3. CWM or TWRP Recovery
4. SuperSU (UPDATE-SuperSU-v1.75.zip) or the latest version

Steps to Root Nexus 7 (2013) LTE Running on Android 4.4.1 KOT49E KitKat and Install CWM/TWRP Recovery
Step 1: Install the Android SDK. The package includes the necessary drivers for connecting your tablet to the computer, which is mandatory for the rooting process.
Step 2: Extract the Fastboot .zip file using winrar/7zip/winzip or any other extracting tool and copy it to the android-sdk-windowsplatform-tools directory on the computer.
Step 4: Copy the CWM or TWRP .img file to the android-sdk-windowsplatform-tools directory on the computer.
Step 5: Connect the Nexus 7 to the computer using USB cable. Then copy the SuperSU .zip file to the SD card of your tablet.
Step 6: Switch off the Nexus 7. Then boot the device into fastboot mode by pressing and holding Volume Up, Volume Down, and Power buttons together.
Step 7: Navigate to android-sdk-windowsplatform-tools directory and open Command Prompt (Shift + Right-click >> Open Command Prompt). Then run the following command:

fastboot flash recovery recovery-clockwork-touch-6.0.4.4-deb.img

Step 8: Once completed, choose RECOVERY from the Fastboot menu and enter Recovery Mode.
Step 9: In CWM Recovery, select "install zip from sdcard" and then select "choose zip from sdcard". Now, navigate to the SuperSU .zip file that you copied earlier and confirm the installation by selecting Yes.
Step 10: Once the installation process completes, return to main recovery menu and select "reboot system now".

Nexus 7 (2013) LTE running on Android 4.4.1 KOT49E KitKat is now rooted successfully. Open the app drawer of the Nexus 7 and look for an app called SuperSU. Verify the root status of the device by downloading Root Checker app from Google Play Store.

Click here to know How to Update Nexus 7 (2013) Mobile with Android 4.4.1 KOT49E KitKat.

Read More

How to Root Nexus 5 on Android 4.4.1 KOT49E KitKat and Install CWM/TWRP Recovery

Google has recently released the Android 4.4.1 Kitkat update with build version KOT49E for the Nexus 5. The new official update is currently available as an Over-The-Air (OTA) update.

Note: You can manually download the OTA for the Nexus 5 directly from Google's Update Servers and follow our step-by-step guide to install the update manually.

Nexus 5 users who have already updated their devices with Android 4.4.1 KOT49E KitKat, may root their devices using the tutorial below.

Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!

Pre-requisites
1. Make a backup of all your important data before following the guide.
2. Enable USB Debugging Mode on the phone. Go to Settings >> About Phone. Tap on Build Number several times till the message shows "You are now a Developer". Exit from "About Phone" and find the "Developer Options" settings. Enable USB debugging.
3. The Nexus 5 bootloader should be unlocked.
4. Ensure the battery of the phone is charged more than 80 percent.
5. The CWM/TWRP Recovery and SuperSU files compatible only with the Nexus 5. Applying these on any incorrect variant will brick the device. Verify the model number of the Nexus 5 by navigating to Settings >> About Phone.

Files Required
1. Android SDK
2. Fastboot
3. CWM or TWRP Recovery
4. SuperSU (UPDATE-SuperSU-v1.75.zip) or the latest version

Steps to Root Nexus 5 Running on Android 4.4.1 KOT49E KitKat and Install CWM/TWRP Recovery
Step 1: Install the Android SDK. The package includes the necessary drivers for connecting your Nexus phone to the computer, which is mandatory for the rooting process.
Step 2: Extract the Fastboot .zip file using winrar/7zip/winzip or any other extracting tool and copy it to the android-sdk-windowsplatform-tools directory on the computer.
Step 4: Copy the CWM or TWRP .img file to the android-sdk-windowsplatform-tools directory on the computer.
Step 5: Connect the Nexus 5 to the computer using USB cable. Then copy the SuperSU .zip file to the SD card of your phone.
Step 6: Switch off the Nexus 5. Then boot the device into fastboot mode by pressing and holding Volume Up, Volume Down, and Power buttons together.
Step 7: Navigate to android-sdk-windowsplatform-tools directory and open Command Prompt (Shift + Right-click >> Open Command Prompt). Then run the following command:

fastboot flash recovery recovery-clockwork-touch-6.0.4.5-hammerhead.img

Step 8: Once completed, choose RECOVERY from the Fastboot menu and enter Recovery Mode.
Step 9: In CWM Recovery, select "install zip from sdcard" and then select "choose zip from sdcard". Now, navigate to the SuperSU .zip file that you copied earlier and confirm the installation by selecting Yes.
Step 10: Once the installation process completes, return to main recovery menu and select "reboot system now".

Nexus 5 running on Android 4.4.1 KOT49E KitKat is now rooted successfully. Open the app drawer of the Nexus 5 and look for an app called SuperSU. Verify the root status of the device by downloading Root Checker app from Google Play Store.

Read More

How to Root Galaxy Star Pro S7262 on Android 4.1.2 Jelly Bean and Install CWM Recovery

Samsung Galaxy Star Pro with model number GT-S7262 has already received the Android 4.1.2 XXUAMK5 Jelly Bean update. The new official firmware is now available as an Over-The-Air (OTA) update as well as through Samsung KIES.

Samsung Galaxy Star Pro S7262 users who have already installed their devices with Android 4.1.2 Jelly Bean, may root their devices using the tutorial below.

Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!

Pre-Requisites
1. Install USB Drivers for Samsung Galaxy Star Pro on your computer.
2. Enable USB Debugging Mode on the device by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. The Galaxy Star Pro should be factory unlocked and not locked to any particular carrier.
5. Ensure the battery of the device is charged more than 80 percent.
6. The ClockworkMod Recovery (CWM) file works only on the Samsung Galaxy Star Pro (GT-S7262). Applying these on any incorrect variant might brick the device. Verify the model number of the Galaxy Star Pro by selecting Settings >> About Phone.

File Required
1. CWM Recovery
2. Superuser (Superuser.zip) or SuperSU (UPDATE-SuperSU-v1.75.zip)
3. Odin 3.07

Steps to Install CWM Recovery on Samsung Galaxy Star Pro S7262
Step 1: Extract the Odin 3.07 and CWM Recovery files using winrar/7zip/winzip or any other extracting tool.
Step 2: Copy the UPDATE-SuperSU-v1.75.zip file to the SD card of your phone.
Step 3: Switch off the Galaxy Star Pro. Then boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 4: Run Odin on the computer as an Administrator.
Step 5: Connect the Galaxy Star Pro to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.

Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.

Step 6: In Odin, click the PDA button and select the recovery.tar.md5 file. Verify that Auto Reboot and Re-Partition options are NOT selected.
Step 7: Double-check and click Start button in Odin. The installation process will now begin.
Step 8: Once the installation process completes, you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect it from the computer.

Steps to Root Galaxy Star Pro S7262 by Installing SuperSU via CWM Recovery
Step 9: Reboot the device into CWM Recovery by pressing and holding Volume Up, Home and Power buttons together.
Step 10: In CWM Recovery, select "install zip from sdcard" and then select "choose zip from sdcard". Now, navigate to the UPDATE-SuperSU-v1.75.zip file that you copied earlier and confirm the installation by selecting Yes.
Step 11: Once installation process is completed, return to main recovery menu and select "reboot system now".

Samsung Galaxy Star Pro S7262 running on Android 4.2.2 Jelly Bean is now rooted successfully. You can now install any app that requires root permission. Verify the root status of the device by downloading Root Checker app from Google Play Store.

Thank's to all fellas at XDA who first tried out this rooting technique. This root method was originally posted via XDA-Developers original thread.

Click here to know How to Update Galaxy Star Pro S7262 with Android 4.1.2 XXUAMK5 Jelly Bean official firmware.

Read More

How to Root Galaxy Tab 3 10.1 P5200/P5210 on Android 4.2.2 Jelly Bean and Install CWM/TWRP Recovery

Samsung Galaxy Tab 3 10.1 users who wish to root and install CWM/TWRP Recovery on their devices running on Android 4.2.2 Jelly Bean, may follow our step-by-step guide.

This tutorial uses ClockworkMod Recovery (CWM)/TWRP was developed and released by the XDA-Developers members, DutchDanny and Angel_666. The root method compatible with the Samsung Galaxy Tab 3 10.1 with model number GT-P5200 (3G) and GT-P5210 (Wi-Fi).

Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!

Pre-Requisites
1. Install USB Drivers for Samsung Galaxy Tab 3 10.1 on your computer.
2. Enable USB Debugging Mode on the device by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. The Galaxy Tab 3 10.1 should be factory unlocked and not locked to any particular carrier.
5. Ensure the battery of the device is charged more than 80 percent.
6. The CWM and TWRP files works only on the Samsung Galaxy Tab 3 10.1 with model number GT-P5200 (3G) and GT-P5210 (Wi-Fi). Applying these on any incorrect variant might brick the device. Verify the model number of the Galaxy Tab 3 10.1 by selecting Settings >> About Phone.

Files Required
1. CWM (Mirror Link) or TWRP
2. Root (root.zip) (Mirror Link)
3. Odin 3.07

Steps to Install CWM/TWRP Recovery on Samsung Galaxy Tab 3 10.1 P5200/P5210
Step 1: Extract the CWM/TWRP and Odin 3.07 files using winrar/7zip/winzip or any other extracting tool.
Step 2: Copy the root.zip file to the external SD card of your device.
Step 3: Switch off the Galaxy Tab 3 10.1. Then boot the device into Download Mode by pressing and holding Volume Down and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 4: Run Odin on the computer as an Administrator.
Step 5: Connect the Galaxy Tab 3 10.1 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.

Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.

Step 6: In Odin, click the PDA button and select the recovery.tar.md5 file. Verify that F. Reset Time checkboxes are selected. Also, ensure the Auto Reboot and Re-Partition option is NOT selected.
Step 7: Double-check and click Start button in Odin. The installation process will now begin.
Step 8: Once installation process is completed, unplug the USB cable to disconnect your device from the computer.

Steps to Root Samsung Galaxy Tab 3 10.1 P5200/P5210
Step 9: Reboot the device into CWM Recovery by pressing and holding Volume Up and Power buttons together.
Step 10: In CWM Recovery, select "install zip from sdcard" and then select "choose zip from external sdcard". Now, navigate to the root.zip file that you copied earlier and confirm the installation by selecting Yes.
Step 11: Once installation process is completed, return to main recovery menu and select "reboot system now".

Samsung Galaxy Tab 3 10.1 P5200/P5210 running on Android 4.2.2 Jelly Bean is now rooted successfully. You can now install any app that requires root permission. Verify the root status of the device by downloading Root Checker app from Google Play Store.

Thank's to all fellas at XDA who first tried out this rooting technique. This root method was originally posted via XDA-Developers original thread.

Click here to know How to Update Galaxy Tab 3 10.1 P5200 with Android 4.2.2 XXUAMK4 Jelly Bean official firmware.

Read More

How to Root Nexus 7 (2013) Mobile on Android 4.4 KRT16S KitKat and Install CWM/TWRP Recovery

Google has rolled out the new Android 4.4 Kitkat update with build version KRT16S for the LTE version of the Nexus 7 (2013). The new official update is currently available as an Over-The-Air (OTA) update.

Nexus 7 (2013) LTE users who have already installed their devices with Android 4.4 KRT16S KitKat, may root their devices using the tutorial below.

Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!

Pre-requisites
1. Make a backup of all your important data before following the guide.
2. Enable USB Debugging Mode on the tablet.
3. The Nexus 7 bootloader should be unlocked.
4. Ensure the battery of the tablet is charged more than 80 percent.
5. The CWM/TWRP Recovery and SuperSU files compatible only with the LTE version of Nexus 7 (2013) running on Android 4.4 KRT16S KitKat. Applying these on any incorrect variant will brick the device. Verify the model number of the Nexus 7 by navigating to Settings >> About Phone.

File Required
1. Android SDK
2. Fastboot
3. CWM or TWRP Recovery
4. SuperSU (UPDATE-SuperSU-v1.75.zip) or the latest version

Steps to Root Nexus 7 (2013) Mobile Running on Android 4.4 KitKat and Install CWM/TWRP Recovery
Step 1: Install the Android SDK. The package includes the necessary drivers for connecting your tablet to the computer, which is mandatory for the rooting process.
Step 2: Extract the Fastboot .zip file using winrar/7zip/winzip or any other extracting tool and copy it to the android-sdk-windowsplatform-tools directory on the computer.
Step 4: Copy the CWM or TWRP .img file to the android-sdk-windowsplatform-tools directory on the computer.
Step 5: Connect the Nexus 7 to the computer using USB cable. Then copy the SuperSU .zip file to the SD card of your tablet.
Step 6: Switch off the Nexus 7. Then boot the device into fastboot mode by pressing and holding Volume Up, Volume Down, and Power buttons together.
Step 7: Navigate to android-sdk-windowsplatform-tools directory and open Command Prompt (Shift + Right-click >> Open Command Prompt). Then run the following command:

fastboot flash recovery recovery-clockwork-touch-6.0.4.4-deb.img

Step 8: Once completed, choose RECOVERY from the Fastboot menu and enter Recovery Mode.
Step 9: In CWM Recovery, select "install zip from sdcard" and then select "choose zip from sdcard". Now, navigate to the SuperSU .zip file that you copied earlier and confirm the installation by selecting Yes.
Step 10: Once the installation process completes, return to main recovery menu and select "reboot system now".

Nexus 7 (2013) LTE running on Android 4.4 KRT16S KitKat is now rooted successfully. Open the app drawer of the Nexus 7 and look for an app called SuperSU. Verify the root status of the device by downloading Root Checker app from Google Play Store.

Read More

How to Root Nexus 7 (2012) Mobile on Android 4.4 KRT16S KitKat and Install CWM/TWRP Recovery

The official Android 4.4 Kitkat Over-The-Air (OTA) update with build version KRT16S is now available for download for the 3G version of the Nexus 7 (2012).

Nexus 7 (2012) 3G users who have already installed their devices with Android 4.4 KRT16S KitKat, may root their devices using the tutorial below.

Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!

Pre-requisites
1. Make a backup of all your important data before following the guide.
2. Enable USB Debugging Mode on the tablet.
3. The Nexus 7 bootloader should be unlocked.
4. Ensure the battery of the tablet is charged more than 80 percent.
5. The CWM/TWRP Recovery and SuperSU files compatible only with the 3G version of Nexus 7 (2012) running on Android 4.4 KRT16S KitKat. Applying these on any incorrect variant will brick the device. Verify the model number of the Nexus 7 by navigating to Settings >> About Phone.

File Required
1. Android SDK
2. Fastboot
3. CWM or TWRP Recovery
4. SuperSU (UPDATE-SuperSU-v1.75.zip) or the latest version

Steps to Root Nexus 7 (2012) Mobile Running on Android 4.4 KitKat and Install CWM/TWRP Recovery
Step 1: Install the Android SDK. The package includes the necessary drivers for connecting your tablet to the computer, which is mandatory for the rooting process.
Step 2: Extract the Fastboot .zip file using winrar/7zip/winzip or any other extracting tool and copy it to the android-sdk-windowsplatform-tools directory on the computer.
Step 4: Copy the CWM or TWRP .img file to the android-sdk-windowsplatform-tools directory on the computer.
Step 5: Connect the Nexus 7 to the computer using USB cable. Then copy the SuperSU .zip file to the SD card of your tablet.
Step 6: Switch off the Nexus 7. Then boot the device into fastboot mode by pressing and holding Volume Up, Volume Down, and Power buttons together.
Step 7: Navigate to android-sdk-windowsplatform-tools directory and open Command Prompt (Shift + Right-click >> Open Command Prompt). Then run the following command:

fastboot flash recovery recovery-clockwork-touch-6.0.4.3-tilapia.img

Step 8: Once completed, choose RECOVERY from the Fastboot menu and enter Recovery Mode.
Step 9: In CWM Recovery, select "install zip from sdcard" and then select "choose zip from sdcard". Now, navigate to the SuperSU .zip file that you copied earlier and confirm the installation by selecting Yes.
Step 10: Once the installation process completes, return to main recovery menu and select "reboot system now".

Nexus 7 (2012) 3G running on Android 4.4 KRT16S KitKat is now rooted successfully. Open the app drawer of the Nexus 7 and look for an app called SuperSU. Verify the root status of the device by downloading Root Checker app from Google Play Store.

Read More

How to Root Nexus 10 on Android 4.4 KRT16S KitKat and Install CWM/TWRP Recovery

Google has released the Android 4.4 KitKat Over-The-Air (OTA) update with build number KRT16S for the Nexus 10.

Nexus 10 users who have already updated their devices with Android 4.4 KRT16S KitKat, may root their devices using the tutorial below.

Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!

Pre-requisites
1. Make a backup of all your important data before following the guide.
2. Enable USB Debugging Mode on the tablet.
3. The Nexus 10 bootloader should be unlocked.
4. Ensure the battery of the tablet is charged more than 80 percent.
5. The CWM/TWRP Recovery and SuperSU files compatible only with the Nexus 10 running on Android 4.4 KRT16S KitKat. Applying these on any incorrect variant will brick the device. Verify the model number of the Nexus 10 by navigating to Settings >> About Phone.

File Required
1. Android SDK
2. Fastboot
3. CWM or TWRP Recovery
4. SuperSU (UPDATE-SuperSU-v1.75.zip) or the latest version

Steps to Root Nexus 10 Running on Android 4.4 KitKat and Install CWM/TWRP Recovery
Step 1: Install the Android SDK. The package includes the necessary drivers for connecting your tablet to the computer, which is mandatory for the rooting process.
Step 2: Extract the Fastboot .zip file using winrar/7zip/winzip or any other extracting tool and copy it to the android-sdk-windowsplatform-tools directory on the computer.
Step 4: Copy the CWM or TWRP .img file to the android-sdk-windowsplatform-tools directory on the computer.
Step 5: Connect the Nexus 10 to the computer using USB cable. Then copy the SuperSU .zip file to the SD card of your tablet.
Step 6: Switch off the Nexus 10. Then boot the device into fastboot mode by pressing and holding Volume Up, Volume Down, and Power buttons together.
Step 7: Navigate to android-sdk-windowsplatform-tools directory and open Command Prompt (Shift + Right-click >> Open Command Prompt). Then run the following command:

fastboot flash recovery recovery-clockwork-touch-6.0.4.3-manta.img

Step 8: Once completed, choose RECOVERY from the Fastboot menu and enter Recovery Mode.
Step 9: In CWM Recovery, select "install zip from sdcard" and then select "choose zip from sdcard". Now, navigate to the SuperSU .zip file that you copied earlier and confirm the installation by selecting Yes.
Step 10: Once the installation process completes, return to main recovery menu and select "reboot system now".

Nexus 10 running on Android 4.4 KRT16S KitKat is now rooted successfully. Open the app drawer of the Nexus 10 and look for an app called SuperSU. Verify the root status of the device by downloading Root Checker app from Google Play Store.

Read More

How to Root Nexus 7 (2013) Wi-Fi on Android 4.4 KRT16S KitKat and Install CWM/TWRP Recovery

The Wi-Fi version of the Google Nexus 7 2013 has received a new Android 4.3 Android 4.4 Kitkat update with build version KRT16S. The new official update is now available as an Over-The-Air (OTA) update.

Nexus 7 (2013) Wi-Fi users who have already updated their devices with Android 4.4 KRT16S KitKat, may root their devices using the tutorial below.

Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!

Pre-requisites
1. Make a backup of all your important data before following the guide.
2. Enable USB Debugging Mode on the tablet.
3. The Nexus 7 bootloader should be unlocked.
4. Ensure the battery of the tablet is charged more than 80 percent.
5. The CWM/TWRP Recovery and SuperSU files compatible only with the Wi-Fi version of Nexus 7 (2013) running on Android 4.4 KRT16S KitKat. Applying these on any incorrect variant will brick the device. Verify the model number of the Nexus 7 by navigating to Settings >> About Phone.

File Required
1. Android SDK
2. Fastboot
3. CWM or TWRP Recovery
4. SuperSU (UPDATE-SuperSU-v1.75.zip) or the latest version

Steps to Root Nexus 7 (2013) Wi-Fi Running on Android 4.4 KitKat and Install CWM/TWRP Recovery
Step 1: Install the Android SDK. The package includes the necessary drivers for connecting your tablet to the computer, which is mandatory for the rooting process.
Step 2: Extract the Fastboot .zip file using winrar/7zip/winzip or any other extracting tool and copy it to the android-sdk-windowsplatform-tools directory on the computer.
Step 4: Copy the CWM or TWRP .img file to the android-sdk-windowsplatform-tools directory on the computer.
Step 5: Connect the Nexus 7 to the computer using USB cable. Then copy the SuperSU .zip file to the SD card of your tablet.
Step 6: Switch off the Nexus 7. Then boot the device into fastboot mode by pressing and holding Volume Up, Volume Down, and Power buttons together.
Step 7: Navigate to android-sdk-windowsplatform-tools directory and open Command Prompt (Shift + Right-click >> Open Command Prompt). Then run the following command:

fastboot flash recovery recovery-clockwork-touch-6.0.4.3-grouper.img

Step 8: Once completed, choose RECOVERY from the Fastboot menu and enter Recovery Mode.
Step 9: In CWM Recovery, select "install zip from sdcard" and then select "choose zip from sdcard". Now, navigate to the SuperSU .zip file that you copied earlier and confirm the installation by selecting Yes.
Step 10: Once the installation process completes, return to main recovery menu and select "reboot system now".

Nexus 7 (2013) Wi-Fi running on Android 4.4 KRT16S KitKat is now rooted successfully. Open the app drawer of the Nexus 7 and look for an app called SuperSU. Verify the root status of the device by downloading Root Checker app from Google Play Store.

Read More

How to Root Nexus 7 (2012) Wi-Fi on Android 4.4 KRT16S KitKat and Install CWM/TWRP Recovery

Google has now rolled out the Android 4.4 Kitkat Over-The-Air (OTA) update with build version KRT16S for the Wi-Fi version of Nexus 7 (2012).

Nexus 7 (2012) Wi-Fi users who have already updated their devices with Android 4.4 KRT16S KitKat, may root their devices using the tutorial below.

Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!

Pre-requisites
1. Make a backup of all your important data before following the guide.
2. Enable USB Debugging Mode on the tablet.
3. The Nexus 7 bootloader should be unlocked.
4. Ensure the battery of the tablet is charged more than 80 percent.
5. The CWM/TWRP Recovery and SuperSU files compatible only with the Wi-Fi version of Nexus 7 (2012) running on Android 4.4 KRT16S KitKat. Applying these on any incorrect variant will brick the device. Verify the model number of the Nexus 7 by navigating to Settings >> About Phone.

File Required
1. Android SDK
2. Fastboot
3. CWM or TWRP Recovery
4. SuperSU (UPDATE-SuperSU-v1.75.zip) or the latest version

Steps to Root Nexus 7 (2012) Wi-Fi Running on Android 4.4 KitKat and Install CWM/TWRP Recovery
Step 1: Install the Android SDK. The package includes the necessary drivers for connecting your tablet to the computer, which is mandatory for the rooting process.
Step 2: Extract the Fastboot .zip file using winrar/7zip/winzip or any other extracting tool and copy it to the android-sdk-windowsplatform-tools directory on the computer.
Step 4: Copy the CWM or TWRP .img file to the android-sdk-windowsplatform-tools directory on the computer.
Step 5: Connect the Nexus 7 to the computer using USB cable. Then copy the SuperSU .zip file to the SD card of your tablet.
Step 6: Switch off the Nexus 7. Then boot the device into fastboot mode by pressing and holding Volume Up, Volume Down, and Power buttons together.
Step 7: Navigate to android-sdk-windowsplatform-tools directory and open Command Prompt (Shift + Right-click >> Open Command Prompt). Then run the following command:

fastboot flash recovery recovery-clockwork-touch-6.0.4.3-grouper.img

Step 8: Once completed, choose RECOVERY from the Fastboot menu and enter Recovery Mode.
Step 9: In CWM Recovery, select "install zip from sdcard" and then select "choose zip from sdcard". Now, navigate to the SuperSU .zip file that you copied earlier and confirm the installation by selecting Yes.
Step 10: Once the installation process completes, return to main recovery menu and select "reboot system now".

Nexus 7 (2012) Wi-Fi running on Android 4.4 KRT16S KitKat is now rooted successfully. Open the app drawer of the Nexus 7 and look for an app called SuperSU. Verify the root status of the device by downloading Root Checker app from Google Play Store.

Read More

How to Root Nexus 4 on Android 4.4 KRT16S KitKat and Install CWM/TWRP Recovery

Google has confirmed the latest Android 4.4 Kitkat official update with build version KRT16S for the Nexus 4 E960. The new official update is now available as an Over-The-Air (OTA) update.

Nexus 4 users who have already updated their devices with Android 4.4 KRT16S KitKat, may root their devices using the tutorial below.

Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!

Pre-requisites
1. Make a backup of all your important data before following the guide.
2. Enable USB Debugging Mode on the phone.
3. The Nexus 4 bootloader should be unlocked.
4. Ensure the battery of the phone is charged more than 80 percent.
5. The CWM/TWRP Recovery and SuperSU files compatible only with the Nexus 4 running on Android 4.4 KRT16S KitKat. Applying these on any incorrect variant will brick the device. Verify the model number of the Nexus 4 by navigating to Settings >> About Phone.

File Required
1. Android SDK
2. Fastboot
3. CWM or TWRP Recovery
4. SuperSU (UPDATE-SuperSU-v1.75.zip) or the latest version

Steps to Root Nexus 4 Running on Android 4.4 KitKat and Install CWM/TWRP Recovery
Step 1: Install the Android SDK. The package includes the necessary drivers for connecting your Nexus phone to the computer, which is mandatory for the rooting process.
Step 2: Extract the Fastboot .zip file using winrar/7zip/winzip or any other extracting tool and copy it to the android-sdk-windowsplatform-tools directory on the computer.
Step 4: Copy the CWM or TWRP .img file to the android-sdk-windowsplatform-tools directory on the computer.
Step 5: Connect the Nexus 4 to the computer using USB cable. Then copy the SuperSU .zip file to the SD card of your phone.
Step 6: Switch off the Nexus 4. Then boot the device into fastboot mode by pressing and holding Volume Up, Volume Down, and Power buttons together.
Step 7: Navigate to android-sdk-windowsplatform-tools directory and open Command Prompt (Shift + Right-click >> Open Command Prompt). Then run the following command:

fastboot flash recovery recovery-clockwork-touch-6.0.4.3-mako.img

Step 8: Once completed, choose RECOVERY from the Fastboot menu and enter Recovery Mode.
Step 9: In CWM Recovery, select "install zip from sdcard" and then select "choose zip from sdcard". Now, navigate to the SuperSU .zip file that you copied earlier and confirm the installation by selecting Yes.
Step 10: Once the installation process completes, return to main recovery menu and select "reboot system now".

Nexus 4 running on Android 4.4 KRT16S KitKat is now rooted successfully. Open the app drawer of the Nexus 4 and look for an app called SuperSU. Verify the root status of the device by downloading Root Checker app from Google Play Store.

Thank's to all fellas at XDA who first tried out this rooting technique. This method was originally posted via XDA-Developer original thread.

Read More

How to Root Galaxy Tab 3 7.0 (Wi-Fi) SM-T210/T210R on Android 4.1.2 Jelly Bean Firmware

Announced in April 2013, Samsung Galaxy Tab 3 7.0 is now available for purchase in various countries. Followed by the market rollout, Senior XDA-Developers member gr8nole has released an easy rooting method for the Wi-Fi version of the Galaxy Tab 3 7.0 with model number SM-T210 and SM-T210R. The root method uses ClockworkMod Recovery (CWM) or TWRP which allows users to root their devices without any difficulty.

Samsung Galaxy Tab 3 7.0 (Wi-Fi) users who wish to root and install CWM/TWRP recovery on their devices running on Android 4.1.2 Jelly Bean, may follow our step-by-step guide.

Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!

Pre-Requisites
1. Install USB Drivers for Samsung Galaxy Tab 3 7.0 on your computer.
2. Enable USB Debugging Mode on the device by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. The Galaxy Tab 3 7.0 should be factory unlocked.
5. Ensure the battery of the device is charged more than 80 percent.
6. The CWM and TWRP recovery works only on the Wi-Fi version of the Samsung Galaxy Tab 3 7.0 with model number SM-T210 and SM-T210R. Applying these on any incorrect variant might brick the device. Verify the model number of the Galaxy Tab 3 7.0 by selecting Settings >> About Phone.

File Required
1. CWM or TWRP
2. Universal Root Package (Mirror Link) (android-armeabi-universal-root-signed.zip)
3. Odin 3.07

Steps to Install CWM/TWRP Recovery on Galaxy Tab 3 7.0 (Wi-Fi) SM-T210/T210R
Step 1: Extract the CWM/TWRP and Odin 3.07 files using winrar/7zip/winzip or any other extracting tool.
Step 2: Copy the android-armeabi-universal-root-signed.zip file to the external SD card of your device.
Step 3: Switch off the Galaxy Tab 3 7.0. Then boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 4: Run Odin on the computer as an Administrator.
Step 5: Connect the Galaxy Tab 3 7.0 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.

Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.

Step 6: In Odin, click the PDA button and select the recovery.tar.md5 file. Make sure that the Auto Reboot and Re-Partition options are NOT checked, only F. Reset Time option is ticked.
Step 7: Double-check and click Start button in Odin. The installation process will now begin.
Step 8: Once the installation process is completed, you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect the device from the computer.

Steps to Root Galaxy Tab 3 7.0 (Wi-Fi) SM-T210/T210R
Step 9: Boot the device into CWM recovery by pressing and holding Volume Up, Home and Power buttons together.
Step 10: In CWM recovery, select "install zip from sdcard" and then select "choose zip from external sdcard". Now, navigate to the android-armeabi-universal-root-signed.zip file that you copied earlier and confirm the installation by selecting Yes.
Step 11: Once installation process is completed, return to main recovery menu and select "reboot system now".

Samsung Galaxy Tab 3 7.0 (Wi-Fi) SM-T210/T210R running on Android 4.1.2 Jelly Bean is now rooted successfully. You can now install any app that requires root permission. Verify the root status of the device by downloading Root Checker app from Google Play Store.

Thank's to all fellas at XDA who first tried out this rooting technique. This root method was originally posted via XDA-Developers original thread.

Click here to know How to Update Galaxy Tab 3 7.0 (Wi-Fi) SM-T210 with Android 4.1.2 XXAMK5 Jelly Bean official firmware.

Read More

How to Root Nexus 10 on Android 4.4 KRT16O KitKat and Install CWM/TWRP Recovery

Google Nexus 10 has already received the official Android 4.4 KitKat Over-The-Air (OTA) update with build number KRT16O.

Nexus 10 users who have already updated their devices with Android 4.4 KRT16O KitKat, may root their devices using the tutorial below.

Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!

Pre-requisites
1. Make a backup of all your important data before following the guide.
2. Enable USB Debugging Mode on the tablet.
3. The Nexus 10 bootloader should be unlocked.
4. Ensure the battery of the tablet is charged more than 80 per cent.
5. The CWM/TWRP Recovery and SuperSU files compatible only with the Nexus 10 running on Android 4.4 KRT16O KitKat. Applying these on any incorrect variant will brick the device. Verify the model number of the Nexus 10 by navigating to Settings >> About Phone.

File Required
1. Android SDK
2. Fastboot
3. CWM or TWRP Recovery
4. SuperSU

Steps to Root Nexus 10 Running on Android 4.4 KitKat and Install CWM/TWRP Recovery
Step 1: Install the Android SDK. The package includes the necessary drivers for connecting your tablet to the computer, which is mandatory for the rooting process.
Step 2: Extract the Fastboot .zip file using winrar/7zip/winzip or any other extracting tool and copy it to the android-sdk-windowsplatform-tools directory on the computer.
Step 4: Copy the CWM or TWRP .img file to the android-sdk-windowsplatform-tools directory on the computer.
Step 5: Connect the Nexus 10 to the computer using USB cable. Then copy the SuperSU .zip file to the SD card of your tablet.
Step 6: Switch off the Nexus 10. Then boot the device into fastboot mode by pressing and holding Volume Up, Volume Down, and Power buttons together.
Step 7: Navigate to android-sdk-windowsplatform-tools directory and open Command Prompt (Shift + Right-click >> Open Command Prompt). Then run the following command:

fastboot flash recovery recovery-clockwork-touch-6.0.4.3-manta.img

Step 8: Once completed, choose RECOVERY from the Fastboot menu and enter Recovery Mode.
Step 9: In CWM Recovery, select "install zip from sdcard" and then select "choose zip from sdcard". Now, navigate to the SuperSU .zip file that you copied earlier and confirm the installation by selecting Yes.
Step 10: Once the installation process completes, return to main recovery menu and select "reboot system now".

Nexus 10 running on Android 4.4 KRT16O KitKat is now rooted successfully. Open the app drawer of the Nexus 10 and look for an app called SuperSU. Verify the root status of the device by downloading Root Checker app from Google Play Store.

Read More

How to Root Nexus 7 (2013) Wi-Fi on Android 4.4 KRT16O KitKat and Install CWM/TWRP Recovery

Google has just started to roll out the Android 4.4 Kitkat official update with build version KRT16O for the Wi-Fi version of the second generation Nexus 7 also known as Nexus 7 2013. The new official update is currently available as an Over-The-Air (OTA) update.

Nexus 7 (2013) Wi-Fi users who have already updated their devices with Android 4.4 KRT16O KitKat, may root their devices using the tutorial below.

Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!

Pre-requisites
1. Make a backup of all your important data before following the guide.
2. Enable USB Debugging Mode on the tablet.
3. The Nexus 7 bootloader should be unlocked.
4. Ensure the battery of the tablet is charged more than 80 per cent.
5. The CWM/TWRP Recovery and SuperSU files compatible only with the Wi-Fi version of Nexus 7 (2013) running on Android 4.4 KRT16O KitKat. Applying these on any incorrect variant will brick the device. Verify the model number of the Nexus 7 by navigating to Settings >> About Phone.

File Required
1. Android SDK
2. Fastboot
3. CWM or TWRP Recovery
4. SuperSU

Steps to Root Nexus 7 (2013) Wi-Fi Running on Android 4.4 KitKat and Install CWM/TWRP Recovery
Step 1: Install the Android SDK. The package includes the necessary drivers for connecting your tablet to the computer, which is mandatory for the rooting process.
Step 2: Extract the Fastboot .zip file using winrar/7zip/winzip or any other extracting tool and copy it to the android-sdk-windowsplatform-tools directory on the computer.
Step 4: Copy the CWM or TWRP .img file to the android-sdk-windowsplatform-tools directory on the computer.
Step 5: Connect the Nexus 7 to the computer using USB cable. Then copy the SuperSU .zip file to the SD card of your tablet.
Step 6: Switch off the Nexus 7. Then boot the device into fastboot mode by pressing and holding Volume Up, Volume Down, and Power buttons together.
Step 7: Navigate to android-sdk-windowsplatform-tools directory and open Command Prompt (Shift + Right-click >> Open Command Prompt). Then run the following command:

fastboot flash recovery recovery-clockwork-touch-6.0.4.3-grouper.img

Step 8: Once completed, choose RECOVERY from the Fastboot menu and enter Recovery Mode.
Step 9: In CWM Recovery, select "install zip from sdcard" and then select "choose zip from sdcard". Now, navigate to the SuperSU .zip file that you copied earlier and confirm the installation by selecting Yes.
Step 10: Once the installation process completes, return to main recovery menu and select "reboot system now".

Nexus 7 (2013) Wi-Fi running on Android 4.4 KRT16O KitKat is now rooted successfully. Open the app drawer of the Nexus 7 and look for an app called SuperSU. Verify the root status of the device by downloading Root Checker app from Google Play Store.

Read More

How to Root Nexus 7 (2012) Wi-Fi on Android 4.4 KRT16O KitKat and Install CWM/TWRP Recovery

Google has recently released the Android 4.4 Kitkat Over-The-Air (OTA) update with build version KRT16O for the Wi-Fi version of Nexus 7 (2012).

Nexus 7 (2012) Wi-Fi users who have already updated their devices with Android 4.4 KRT16O KitKat, may root their devices using the tutorial below.

Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!

Pre-requisites
1. Make a backup of all your important data before following the guide.
2. Enable USB Debugging Mode on the tablet.
3. The Nexus 7 bootloader should be unlocked.
4. Ensure the battery of the tablet is charged more than 80 per cent.
5. The CWM/TWRP Recovery and SuperSU files compatible only with the Wi-Fi version of Nexus 7 (2012) running on Android 4.4 KRT16O KitKat. Applying these on any incorrect variant will brick the device. Verify the model number of the Nexus 7 by navigating to Settings >> About Phone.

File Required
1. Android SDK
2. Fastboot
3. CWM or TWRP Recovery
4. SuperSU

Steps to Root Nexus 7 (2012) Wi-Fi Running on Android 4.4 KitKat and Install CWM/TWRP Recovery
Step 1: Install the Android SDK. The package includes the necessary drivers for connecting your tablet to the computer, which is mandatory for the rooting process.
Step 2: Extract the Fastboot .zip file using winrar/7zip/winzip or any other extracting tool and copy it to the android-sdk-windowsplatform-tools directory on the computer.
Step 4: Copy the CWM or TWRP .img file to the android-sdk-windowsplatform-tools directory on the computer.
Step 5: Connect the Nexus 7 to the computer using USB cable. Then copy the SuperSU .zip file to the SD card of your tablet.
Step 6: Switch off the Nexus 7. Then boot the device into fastboot mode by pressing and holding Volume Up, Volume Down, and Power buttons together.
Step 7: Navigate to android-sdk-windowsplatform-tools directory and open Command Prompt (Shift + Right-click >> Open Command Prompt). Then run the following command:

fastboot flash recovery recovery-clockwork-touch-6.0.4.3-grouper.img

Step 8: Once completed, choose RECOVERY from the Fastboot menu and enter Recovery Mode.
Step 9: In CWM Recovery, select "install zip from sdcard" and then select "choose zip from sdcard". Now, navigate to the SuperSU .zip file that you copied earlier and confirm the installation by selecting Yes.
Step 10: Once the installation process completes, return to main recovery menu and select "reboot system now".

Nexus 7 (2012) Wi-Fi running on Android 4.4 KRT16O KitKat is now rooted successfully. Open the app drawer of the Nexus 7 and look for an app called SuperSU. Verify the root status of the device by downloading Root Checker app from Google Play Store.

Read More

How to Root Nexus 4 on Android 4.4 KRT16O KitKat and Install CWM/TWRP Recovery

Nexus 4 users who have already installed their devices with Android 4.4 KRT16O KitKat, may root their devices using the tutorial below.

Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!

Pre-requisites
1. Make a backup of all your important data before following the guide.
2. Enable USB Debugging Mode on the phone.
3. The Nexus 4 bootloader should be unlocked.
4. Ensure the battery of the phone is charged more than 80 per cent.
5. The CWM/TWRP Recovery and SuperSU files compatible only with the Nexus 4 running on Android 4.4 KRT16O KitKat. Applying these on any incorrect variant will brick the device. Verify the model number of the Nexus 4 by navigating to Settings >> About Phone.

File Required
1. Android SDK
2. Fastboot
3. CWM or TWRP Recovery
4. SuperSU

Steps to Root Nexus 4 Running on Android 4.4 KitKat and Install CWM/TWRP Recovery
Step 1: Install the Android SDK. The package includes the necessary drivers for connecting your Nexus phone to the computer, which is mandatory for the rooting process.
Step 2: Extract the Fastboot .zip file using winrar/7zip/winzip or any other extracting tool and copy it to the android-sdk-windowsplatform-tools directory on the computer.
Step 4: Copy the CWM or TWRP .img file to the android-sdk-windowsplatform-tools directory on the computer.
Step 5: Connect the Nexus 4 to the computer using USB cable. Then copy the SuperSU .zip file to the SD card of your phone.
Step 6: Switch off the Nexus 4. Then boot the device into fastboot mode by pressing and holding Volume Up, Volume Down, and Power buttons together.
Step 7: Navigate to android-sdk-windowsplatform-tools directory and open Command Prompt (Shift + Right-click >> Open Command Prompt). Then run the following command:

fastboot flash recovery recovery-clockwork-touch-6.0.4.3-mako.img

Step 8: Once completed, choose RECOVERY from the Fastboot menu and enter Recovery Mode.
Step 9: In CWM Recovery, select "install zip from sdcard" and then select "choose zip from sdcard". Now, navigate to the SuperSU .zip file that you copied earlier and confirm the installation by selecting Yes.
Step 10: Once the installation process completes, return to main recovery menu and select "reboot system now".

Nexus 4 running on Android 4.4 KRT16O KitKat is now rooted successfully. Open the app drawer of the Nexus 4 and look for an app called SuperSU. Verify the root status of the device by downloading Root Checker app from Google Play Store.

Thank's to all fellas at XDA who first tried out this rooting technique. This method was originally posted via XDA-Developer original thread.

Read More

How to Root Galaxy Mega 6.3 LTE (Canadian) SGH-I527M on Android 4.2.2 Jelly Bean Firmware

The LTE version of Samsung Galaxy Mega 6.3 with model number SGH-I527M is now available for purchase in Canada through carrier partners - Rogers, Bell, Telus, and SaskTel.

Followed by the market rollout, XDA-Developers member MingYueHaoKong has released an easy rooting method for Galaxy Mega 6.3. The root method actually designed for the international version of Galaxy Mega 6.3 GT-I9200, but tested working on the Canadian variant of the Galaxy Mega 6.3 LTE SGH-I467M as well.

Samsung Galaxy Mega 6.3 LTE SGH-i527M users who wish to root and install CWM Recovery on their devices running on Android 4.2.2 Jelly Bean, may follow our step-by-step guide.

Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!

Pre-Requisites
1. Install USB Drivers for Samsung Galaxy Mega 6.3 on your computer.
2. Enable USB Debugging Mode on the device by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. Ensure the battery of the device is charged more than 80 percent.
5. The ClockworkMod Recovery (CWM) and SuperSU files works only on Samsung Galaxy Mega 6.3 LTE SGH-I527M. Applying these on any incorrect variant might brick the device. Verify the model number of the Galaxy Mega 6.3 by selecting Settings >> About Phone.

File Required
1. CWM Touch Recovery (Mirror Link)
2. SuperSU (UPDATE-SuperSU-v1.51.zip) or the latest version
3. Odin 3.09

Steps to Install CWM Recovery on Samsung Galaxy Mega 6.3 LTE SGH-I527M
Step 1: Extract the Odin 3.09 file using winrar/7zip/winzip or any other extracting tool.
Step 2: Copy the UPDATE-SuperSU-v1.51.zip file to the external SD card of your phone.
Step 3: Switch off the Galaxy Mega 6.3. Then boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 4: Run Odin on the computer as an Administrator.
Step 5: Connect the Galaxy Mega 6.3 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.

Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.

Step 6: In Odin, click the AP button and select the CWM Touch Recovery file. Verify that Auto Reboot and F. Reset Time checkboxes are selected. Also, ensure the Re-Partition option is NOT selected.
Step 7: Double-check and click Start button in Odin. The installation process will now begin.
Step 8: Once the installation process is completed, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect it from the computer.

Steps to Root Galaxy Mega 6.3 LTE SGH-I527M by Installing SuperSU via CWM Recovery
Step 9: Reboot the device into CWM Recovery by pressing and holding Volume Up, Home and Power buttons together.
Step 10: In CWM Recovery, select install zip from sdcard and then select choose zip from external sdcard. Now, navigate to the UPDATE-SuperSU-v1.51.zip file that you copied earlier and confirm the installation by selecting Yes.
Step 11: Once installation process is completed, return to main recovery menu and select reboot system now.

Samsung Galaxy Mega 6.3 LTE SGH-I527M running on Android 4.2.2 Jelly Bean is now rooted successfully. You can now install any app that requires root permission. Verify the root status of the device by downloading Root Checker app from Google Play Store.

Thank's to all fellas at XDA who first tried out this rooting technique. This root method was originally posted via XDA-Developers original thread.

Read More

How to Install ClockworkMod Recovery (CWM) on Galaxy S4 I9505

ClockworkMod Recovery (CWM) is a replacement recovery option for Android devices, made by Koushik "Koush" Dutta. It is based on the Android 2.1 (Eclair) recovery image. ClockworkMod Recovery allowing users to perform several advanced recovery, restoration, installation and maintenance operations on your Android device that aren't possible with the stock recovery, and is one of the most common ways used to gain root access, back up device data, install custom ROMs, kernels, themes & mods, and more.

Samsung Galaxy S4 I9505 users can now install ClockworkMod Recovery on their devices using the tutorial below.

Pre-requisites
1. Install USB Driver for Samsung Galaxy S4 I9505 on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. The Galaxy S4 I9505 should be factory unlocked and not locked to any particular carrier.
5. Ensure the battery of the phone is charged more than 80 per cent.
6. The ClockworkMod Recovery file works only on Samsung Galaxy S4 I9505. Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy S4 I9505 by navigating to Settings >> About Phone.

File Required
1. ClockworkMod Recovery for Galaxy S4 I9505 (i9505-cwm-recovery-6.0.3.2(0611).tar)
2. Odin 3.07

Steps to Install ClockworkMod Recovery on Galaxy S4 I9505
Step 1: Extract Odin 3.07 file using winrar/7zip/winzip or any other extracting tool.
Step 2: Switch off the Galaxy S4 I9505. Then boot the device into Download Mode by pressing and holding Volume Down + Home buttons together and then press the Power button until the device turns on. Now press the Volume Up button to enter Download Mode.
Step 3: Launch Odin on the computer.
Step 4: Connect the Galaxy S4 I9505 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.
Step 5: In Odin, click the PDA button and select the i9505-cwm-recovery-6.0.3.2(0611).tar file.
Step 6: Verify that Auto Reboot and F.Reset Time checkboxes are selected in Odin. Also, ensure the Re-Partition option in Odin is not selected.
Step 7: Double-check and click Start in Odin. The installation process will now begin.
Step 8: Once the installation process is completed, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from computer.

That's it, ClockworkMod Recovery is now installed on your Samsung Galaxy S4 I9505.

ClockworkMod Recovery

This method was originally posted via XDA-Developer original thread.

Read More